I installed tpconfig, but tpconfig seems to have some errors. The output of tpconfig -i is:
Found Synaptics Touchpad Firmware: 5.9 (single-byte mode). Sensor type: unknown (27). Geometry: rectangular/landscape/down. tpconfig: synaptics.c:332: query_modes: Assertion 'b1 == 0x3B' failed. Aborted Any suggestions? Thanks, Ori --- "Stumbaum, Rainer" <[EMAIL PROTECTED]> wrote: > Try the package tpconfig to configure your > touchpad... > > > -----Original Message----- > > From: Ori Weisberg [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, November 13, 2002 1:38 AM > > To: [email protected] > > Subject: Mouse on a dell Latitude C640 > > > > > > Hi all, > > > > I have a dell Latitude C640, > > and running kernel 2.4.18 with XF86 4.2.1 > > > > The laptop has both a touchpad and the tracking > stick > > as built-in tracking device. My problem seems to > be in > > how these respond. The touchpad seems very > sensitive, > > it will do stuff even though i am not touching it. > In > > addition, the regular mouse buttons do not always > > respond to clicking. > > > > in XF86Config-4 > > the protocol is set to "PS/2" and > > the device to "/dev/psaux" > > > > > > Any help would be greatly appreciated :-) > > Ori > > > > > > __________________________________________________ > > Do you Yahoo!? > > U2 on LAUNCH - Exclusive greatest hits videos > > http://launch.yahoo.com/u2 > > > > > > -- > > To UNSUBSCRIBE, email to > [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact > > [EMAIL PROTECTED] > > __________________________________________________ Do you Yahoo!? Yahoo! Web Hosting - Let the expert host your site http://webhosting.yahoo.com
