Am Mit, 2003-04-02 um 14.53 schrieb Thomas Friedrichsmeier: > Hi! > > After I finally broke off the adaptor-cable of my old network-card, I now > have > a new noname 8139-based one. > Problem is, that the cardmgr can find and activate the card, but does not > load > the required modules or start the interface. The card works just fine, if I > modprobe the 8139too-module and configure the interface by hand, but I'd > rather have this happen automatically, like it worked with my old card. > The following gets logged to /var/log/messages when I do /etc/init.d/pcmcia > start:
[...]
> I tried adding the following lines to /etc/pcmcia/config:
> device "8139too"
> class "network" module "net/8139too"
^^^^
Try removing "net/"
>
> card "NoName 10/100"
> manfid 0x10ec, 0x8139
> bind "8139too"
You may want to add this to /etc/pcmcia/config-2.4 if it exists.
At least on my system only config-2.4 is used.
If this doesn't help you can still do an echo "8139too" >> /etc/modules
which will load the module in any case on a reboot.
HTH
--
Matthias Hentges
Cologne / Germany
[www.hentges.net] -> PGP welcome, HTML tolerated
ICQ: 97 26 97 4 -> No files, no URL's
My OS: Debian Woody: Geek by Nature, Linux by Choice
signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil
