On Thu, 15 May 2003 00:43:00 -0400 (EDT) "Jerry Cheung" <[EMAIL PROTECTED]> wrote:
> > Hi there, > > I recently bought a toshiba satillite 100c (old 1995 machine) and stuffed in > a pcmcia ethernet card in. Before I wiped off the really ancient win95, I > checked to make sure that the card was supported and according to > pcmcia-cs.sourceforge.net , this card is supported > > So I went along and download the "compact" floppies: root, rescue, driver-1, > driver-2, and all went well until I tried to configure the pcmcia. Switching > to the 3rd virtual terminal, I saw this message: "smc91-cs device or resource > busy", and also "insmod: pcmica-core already exists" > Thinking I picked the wrong choice of i82365, I tried both, but to no avail. > > Does any one use this card and know of any settings (irq, base address, etc) > that I might've missed? Or just what might fix this problem? Thanks in > advance. > Hello im Using the 3c589d on a siemens secnic mobile 510 and a toshiba satellite 2540 cds. it works on the address 0x300 and Irq 3, when i installed i used the network install cd and choosed to start whit bf24 at the boot prompt i am not sure but i think the installation program found the card by it self after i added the pcmica "support" / Peter Holmberg > _______________________________________________ > Join Excite! - http://www.excite.com > The most personalized portal on the Web! > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
