Hello, Here is the output from the some commands. If you need more info, let me know! Joeri. IFCONFIG --------
eth0 Link encap:Ethernet HWaddr 00:00:E2:9E:4A:FB inet addr:192.168.0.66 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:3 Base address:0x7000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:992 (992.0 b) TX bytes:992 (992.0 b) DMESG: ------------ Linux version 2.4.20 ([EMAIL PROTECTED]) (gcc version 3.3 (Debian)) #8 SMP Mon Jun 23 22:43:48 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000f760000 (usable) BIOS-e820: 000000000f760000 - 000000000f76e000 (ACPI data) BIOS-e820: 000000000f76e000 - 000000000f780000 (ACPI NVS) BIOS-e820: 000000000f780000 - 0000000010000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) 247MB LOWMEM available. found SMP MP-table at 000f5cc0 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 63328 zone(0): 4096 pages. zone(1): 59232 pages. zone(2): 0 pages. ACPI: Searched entire block, no RSDP was found. ACPI: RSDP located at physical address c00f5c60 RSD PTR v0 [PTLTD ] __va_range(0xf7698d1, 0x68): idx=8 mapped at ffff6000 ACPI table found: RSDT v1 [PTLTD RSDT 1540.0] __va_range(0xf76df14, 0x24): idx=8 mapped at ffff6000 __va_range(0xf76df14, 0x74): idx=8 mapped at ffff6000 ACPI table found: FACP v1 [INTEL NBGV 1540.0] __va_range(0xf76df88, 0x24): idx=8 mapped at ffff6000 __va_range(0xf76df88, 0x50): idx=8 mapped at ffff6000 ACPI table found: APIC v1 [PTLTD APIC 1540.0] __va_range(0xf76df88, 0x50): idx=8 mapped at ffff6000 LAPIC (acpi_id[0x0000] id[0x0] enabled[1]) CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16 IOAPIC (id[0x1] address[0xfec00000] global_irq_base[0x0]) INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1]) 1 CPUs total Local APIC address fee00000 __va_range(0xf76dfd8, 0x24): idx=8 mapped at ffff6000 __va_range(0xf76dfd8, 0x28): idx=8 mapped at ffff6000 ACPI table found: BOOT v1 [PTLTD $SBFTBL$ 1540.0] Enabling the CPU's according to the ACPI table Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: BKDG+ICH4 APIC at: 0xFEE00000 I/O APIC #1 Version 32 at 0xFEC00000. Processors: 1 Kernel command line: BOOT_IMAGE=Linux ro root=302 Initializing CPU#0 Detected 1999.811 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3984.58 BogoMIPS Memory: 246540k/253312k available (2256k kernel code, 6384k reserved, 739k data, 140k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Hyper-Threading is disabled Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU0: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz stepping 07 per-CPU timeslice cutoff: 1462.74 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Error: only one processor found. ENABLING IO-APIC IRQs Setting 1 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 1 ... ok. init IO_APIC IRQs ..TIMER: vector=0x31 pin1=-1 pin2=0 ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 33. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... .... register #00: 01000000 ....... : physical APIC id: 01 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 31 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 001 01 1 1 0 0 0 1 1 79 0b 001 01 1 1 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 0 0 0 0 0 1 1 A9 11 001 01 0 0 0 0 0 1 1 B1 12 001 01 0 0 0 0 0 1 1 B9 13 001 01 0 0 0 0 0 1 1 C1 14 001 01 0 0 0 0 0 1 1 C9 15 001 01 0 0 0 0 0 1 1 D1 16 001 01 0 0 0 0 0 1 1 D9 17 001 01 0 0 0 0 0 1 1 E1 IRQ to pin mappings: IRQ0 -> 0:0-> 0:0 IRQ1 -> 0:1 IRQ2 -> 0:2 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1999.7308 MHz. ..... host bus clock speed is 99.9864 MHz. cpu: 0, clocks: 999864, slice: 499932 CPU0<T0:999856,T1:499920,D:4,S:499932,C:999864> Waiting on wait_init_idle (map = 0x0) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfd824, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 PCI->APIC IRQ transform: (B0,I2,P0) -> 0 PCI->APIC IRQ transform: (B0,I29,P0) -> 0 PCI->APIC IRQ transform: (B0,I29,P1) -> 3 PCI->APIC IRQ transform: (B0,I29,P2) -> 0 PCI->APIC IRQ transform: (B0,I29,P3) -> 7 PCI->APIC IRQ transform: (B0,I31,P0) -> 1 PCI->APIC IRQ transform: (B0,I31,P1) -> 1 PCI->APIC IRQ transform: (B0,I31,P1) -> 1 PCI->APIC IRQ transform: (B0,I31,P1) -> 1 PCI->APIC IRQ transform: (B2,I5,P0) -> 3 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). NTFS driver v1.1.22 [Flags: R/O] tbxface-0099 [01] Acpi_load_tables : ACPI Tables successfully loaded Parsing Methods:............................................................................................................................................................................................... 191 Control Methods found and parsed (710 nodes total) ACPI Namespace successfully loaded at root c0455be0 ACPI: Core Subsystem version [20011018] evxfevnt-0081 [-31] Acpi_enable : Transition to ACPI mode successful Executing device _INI methods:................................................. 49 Devices found: 49 _STA, 1 _INI Completing Region and Field initialization:........................................... 20/23 Regions, 23/23 Fields initialized (710 nodes total) ACPI: Subsystem enabled EC: found, GPE 28 ACPI: System firmware supports S0 S3 S4 S5 Processor[0]: C0 C1 C2 C3, 8 throttling states ACPI: Battery socket found, battery present ACPI: AC Adapter found ACPI: Power Button (FF) found ACPI: Multiple power buttons detected, ignoring fixed-feature ACPI: Power Button (CM) found ACPI: Sleep Button (CM) found ACPI: Lid Switch (CM) found ACPI: Thermal Zone found pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled i810_rng: RNG not detected Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller on PCI bus 00 dev f9 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MHS2040AT, ATA DISK drive hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c04700e4, I/O limit 4095Mb (mask 0xffffffff) hda: 78140160 sectors (40008 MB) w/2048KiB Cache, CHS=4864/255/63, UDMA(100) hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hda2 hda3 hda4 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 196M agpgart: Detected an Intel 845G Chipset. agpgart: detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xd8000000 [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] AGP 0.99 on Intel i810 @ 0xd8000000 128MB [drm] Initialized radeon 1.1.1 20010405 on minor 1 [drm] AGP 0.99 on Intel i810 @ 0xd8000000 128MB [drm] Initialized i810 1.2.0 20010920 on minor 2 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 Intel 810 + AC97 Audio, version 0.24, 22:45:40 Jun 23 2003 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xd0080c00 and 0xd0080800, IRQ 1 i810_audio: unable to allocate irq 1 es1371: version v0.30 time 22:45:42 Jun 23 2003 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: No IRQ known for interrupt pin A of device 02:09.0. Probably buggy MP table. usb.c: registered new driver hub Yenta IRQ list 0038, PCI irq0 Socket status: 30000007 uhci.c: USB Universal Host Controller Interface driver v1.1 PCI: No IRQ known for interrupt pin A of device 00:1d.0. Probably buggy MP table. uhci.c: found UHCI device with no IRQ assigned. check BIOS settings! PCI: Setting latency timer of device 00:1d.1 to 64 uhci.c: USB UHCI at I/O 0x1820, IRQ 3 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: No IRQ known for interrupt pin C of device 00:1d.2. Probably buggy MP table. uhci.c: found UHCI device with no IRQ assigned. check BIOS settings! Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 140k freed Adding Swap: 747012k swap-space (priority -1) 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 Fast Ethernet at 0xd00f7000, 00:00:e2:9e:4a:fb, IRQ 3 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. memory : cea6bd80 memory : cea6bd00 memory : cea6bc80 memory : cea6bd00 memory : cea6bc80 memory : cf3d8b80 memory : cea6bc80 memory : cf3d8b80 memory : cea6bd80 memory : cf3d8b80 memory : cea6bd80 memory : cea6bd00 NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx queue start entry 4 dirty entry 0. eth0: Tx descriptor 0 is 00002000. (queue head) eth0: Tx descriptor 1 is 00002000. eth0: Tx descriptor 2 is 00002000. eth0: Tx descriptor 3 is 00002000. eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx queue start entry 4 dirty entry 0. eth0: Tx descriptor 0 is 00002000. (queue head) eth0: Tx descriptor 1 is 00002000. eth0: Tx descriptor 2 is 00002000. eth0: Tx descriptor 3 is 00002000. eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx queue start entry 4 dirty entry 0. eth0: Tx descriptor 0 is 00002000. (queue head) eth0: Tx descriptor 1 is 00002000. eth0: Tx descriptor 2 is 00002000. eth0: Tx descriptor 3 is 00002000. eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
