Hi Juan, Lateley, I found your reply. Perhaps you solved the problem already. I would be interested in the solution, then.
Am Sam, 2003-07-12 um 12.38 schrieb juan: > if i disable the alsa module (maestro3) using irq 5, no more freezes Good to know. > but freezes are not reproduciable, sometimes, at boot, the system will > freeze ten times and some other day, no problem > 00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev > 03) > Flags: bus master, medium devsel, latency 32 > Memory at f4000000 (32-bit, prefetchable) [size=64M] > Capabilities: [a0] AGP version 1.0 > > 00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev > 03) (prog-if 00 [Normal decode]) > Flags: bus master, 66Mhz, medium devsel, latency 32 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: fd000000-feffffff > Prefetchable memory behind bridge: f8000000-fbffffff > > 00:03.0 CardBus bridge: Texas Instruments PCI1420 > Subsystem: Dell Computer Corporation: Unknown device 00b1 > Flags: bus master, medium devsel, latency 32, IRQ 11 > Memory at 10000000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 > I/O window 0: 00000000-00000003 > I/O window 1: 00000000-00000003 > 16-bit legacy interface ports at 0001 > > 00:03.1 CardBus bridge: Texas Instruments PCI1420 > Subsystem: Dell Computer Corporation: Unknown device 00b1 > Flags: bus master, medium devsel, latency 32, IRQ 11 > Memory at 10001000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 > I/O window 0: 00000000-00000003 > I/O window 1: 00000000-00000003 > 16-bit legacy interface ports at 0001 > > 00:07.0 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) > Flags: bus master, medium devsel, latency 0 > > 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if > 80 [Master]) > Flags: bus master, medium devsel, latency 32 > I/O ports at 0860 [size=16] > > 00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if > 00 [UHCI]) > Flags: bus master, medium devsel, latency 32, IRQ 11 > I/O ports at dce0 [size=32] On my lap, this is also using irq 5. I had some weird freezing as well. Couldn't track the reason; anyway i'm satisfied with enabling gpm that cured it. > 00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 03) > Flags: medium devsel, IRQ 9 > > 00:08.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI > Audio Accelerator (rev 10) > Subsystem: Dell Computer Corporation: Unknown device 00b1 > Flags: bus master, medium devsel, latency 32, IRQ 5 > I/O ports at d800 [size=256] > Memory at f3ffe000 (32-bit, non-prefetchable) [size=8K] > Capabilities: [c0] Power Management version 2 So you did compile maestro3 into the kernel ? Perhaps you can try to compile it as module. It gives you the opportunity to change the irq. > 00:10.0 Ethernet controller: 3Com Corporation 3c556 Hurricane CardBus (rev 10) > Subsystem: 3Com Corporation: Unknown device 6456 > Flags: bus master, medium devsel, latency 32, IRQ 11 > I/O ports at d400 [size=256] > Memory at f3ffdc00 (32-bit, non-prefetchable) [size=128] > Memory at f3ffd800 (32-bit, non-prefetchable) [size=128] > Expansion ROM at fc000000 [disabled] [size=128K] > Capabilities: [50] Power Management version 2 > > 00:10.1 Communication controller: 3Com Corporation Mini PCI 56k Winmodem (rev > 10) > Subsystem: 3Com Corporation: Unknown device 615b > Flags: bus master, medium devsel, latency 32, IRQ 11 > I/O ports at d000 [size=256] > Memory at f3ffd400 (32-bit, non-prefetchable) [size=256] > Memory at f3ffd000 (32-bit, non-prefetchable) [size=128] > Capabilities: [50] Power Management version 2 > > 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP > 2x (rev 02) (prog-if 00 [VGA]) > Subsystem: Dell Computer Corporation: Unknown device 00b1 > Flags: bus master, stepping, 66Mhz, medium devsel, latency 32, IRQ 11 > Memory at f8000000 (32-bit, prefetchable) [size=64M] > I/O ports at ec00 [size=256] > Memory at fdffc000 (32-bit, non-prefetchable) [size=16K] > Expansion ROM at <unassigned> [disabled] [size=128K] > Capabilities: [50] AGP version 2.0 > Capabilities: [5c] Power Management version 2 If you do that, note the module's name. Try assigining an irq while loading it with modprobe manually. Confirm the module name and options line are correct. Then you can create a /etc/modutils/audio file (choose the name freely) with an options line for it, advising another irq. Then re-run update-modules to recreate /etc/modules.conf. -- >From another mail i catched an example alsa 'audio' entry for you: Note this is an example for the module snd-via8233. I don't know if it fits for you as well. Probably you only need an 'options' line, with appropriate parameters. #ALSA alias char-major-14 soundcore alias char-major-116 snd alias snd-card-0 snd-via8233 options snd-card-0 port=Oxe100 irq=10 # this is the key entry i added to make things working!! alias sound-slot-0 snd-card-0 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss good luck
