On 17-12-2003, 12:41 -0500, Rob wrote: > On Wednesday 17 December 2003 11:58 am, Andrei Stankevich wrote: > <snip> > > What I need to do to setup sound and network driver correctly? > > I had a similar situation a while back myself. If I ran pcmcia and tried to > use XMMS, it would stutter and lock. This is an older HP Omnibook 4100 with a > crystal audio chipset (cs4232 module). I had to determine which IRQ and IO > port settings are distinct for my audio hardware and (in my case) pcmcia. > After that, it was a matter of editing /etc/pcmcia/config.opts in which there > was this line: > include port 0x100-0x4ff, port 0x800-0x8ff, port 0xc00-0xcff > which I had to change to: > include port 0x100-0x1ff, port 0x800-0x8ff, port 0xc00-0xcff > I also added: > exclude irq 9 > exclude irq 11 > to the end of the file to reserve those IRQs for my sound card. I was > fortunate to find these settings by doing some heavy searching, as I'm not > all that hardware savvy and I'd have no idea how to come up with them on my > own. > Hopefully this might point you in the direction you need to go. > Best of luck. >
Many thanks for your answer. But how can I get information about correct ports and IRQ numbers? Andrei.
