Ivan Glushkov wrote:
Exactly that was the problem. Thank you. But now I get:
#wpa_supplicant -i eth1 -D ipw
ioctl[SIOCSIWPMKSA]: Operation not supported
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Trying to associate with xx:xx:xx:xx:xx:xx (SSID='MyNet' freq=0 MHz)
Associated with xx:xx:xx:xx:xx:xx
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Invalid argument
Failed to set encryption.
WPA: Failed to set PTK to the driver.
Authentication with xx:xx:xx:xx:xx:xx timed out.
Trying to associate with xx:xx:xx:xx:xx:xx (SSID='MyNet' freq=0 MHz)
Associated with xx:xx:xx:xx:xx:xx
ioctl[IPW_IOCTL_WPA_SUPPLICANT]: Invalid argument
Failed to set encryption.
WPA: Failed to set PTK to the driver.
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
Be sure to check out the ipw2200 bugtracker at:
http://www.bughost.org/bugzilla/
I ran into a problem like this recently, and was able to get around it
by adding a "hwcrypto=0" option to the ipw2200 driver. (For 2.6.x
kernels, I think you do this by creating a file {the name isn't
important, but you might as well call it "ipw2200"} in /etc/modprobe.d
with the contents:
options ipw2200 hwcrypto=0
This, apparently, turns off the hardware-based encryption in the
ipw2200.... which isn't much of a problem because wpa_supplicant can do
it in software. HOWEVER.... wpa_supplicant doesn't seem to do WEP. So,
if you use hwcrypto=0, you'll probably lose the ability to connect to
any WEP-only AP's (I did, anyway).
- Joe
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
