Hi, I'm new to linux, I've just installed a debian distro of it (version 31r0a, kernel 2.4.27 because I didn't manage to install with 2.6) on my laptop (ASUS A3500N) and I'm trying to get the system working. Unfortunately I had problems during the asus_acpi installation...
First of all, I have already sent this mail to "acpi4asus-user" with no answer (I downloaded the archive from sourceforge, section acpi4asus). I tried to include the output of /proc/acpi/asus/info and /proc/acpi/dsdt but I cannot locate the directory /proc/acpi/ so I included every step of my installation process plus dmesg (sorry if the output is too long, but I chose not to modify it). I can tell you that also my soundcard isn't working at all (I don't know if it could be of some interest) and linux doesn't see I've got a battery (he acts as if I am "no battery - plugged in"). Maybe I should update to a 2.6.x kernel but I have fear not to be able to boot my system after this (and I probably won't be able to restore the previous kernel). If you need some others informations please tell me! Thanks! Luca ------------------------------------------------------------------ rutja:~/my_system/acpi4asus-0.29# make make -C driver make[1]: Entering directory `/root/my_system/acpi4asus-0.29/driver' gcc -DLINUX -D__KERNEL__ -DMODULE -I/lib/modules/2.4.27-2-386/build/include `./get_include.sh /lib/modules/2.4.27-2-386/build/drivers/acpi /lib/modules/2.4.27-2-386/build/include/acpi` -Wall -Wstrict-prototypes -fno-strict-aliasing -pipe -mpreferred-stack-boundary=2 -fomit-frame-pointer -DMODVERSIONS -include /lib/modules/2.4.27-2-386/build/include/linux/modversions.h -c -o asus_core.o asus_core.c ld -r -o asus_acpi.o asus_core.o make[1]: Leaving directory `/root/my_system/acpi4asus-0.29/driver' make -C asus_acpid make[1]: Entering directory `/root/my_system/acpi4asus-0.29/asus_acpid' cc -Wall -g -DVERSION="\"1.0.3\"" -c -o acpid.o acpid.c cc -Wall -g -DVERSION="\"1.0.3\"" -c -o event.o event.c cc -Wall -g -DVERSION="\"1.0.3\"" -c -o ud_socket.o ud_socket.c cc -o asus_acpid acpid.o event.o ud_socket.o make[1]: Leaving directory `/root/my_system/acpi4asus-0.29/asus_acpid' rutja:~/my_system/acpi4asus-0.29# make install make[1]: Entering directory `/root/my_system/acpi4asus-0.29/driver' mkdir -p /lib/modules/2.4.27-2-386/kernel/drivers/acpi /usr/bin/install -m 0664 -o root -g root asus_acpi.o /lib/modules/2.4.27-2-386/kernel/drivers/acpi/asus_acpi.o /sbin/depmod -a make[1]: Leaving directory `/root/my_system/acpi4asus-0.29/driver' make[1]: Entering directory `/root/my_system/acpi4asus-0.29/asus_acpid' for a in asus_acpid.8; do gzip -f -9 -c $a > $a.gz; done mkdir -p /usr/local/bin install -m 755 asus_acpid /usr/local/bin mkdir -p /usr/local/share/man/man8 install -m 644 asus_acpid.8.gz /usr/local/share/man/man8 make[1]: Leaving directory `/root/my_system/acpi4asus-0.29/asus_acpid' Don't forget to create your ~/.asus_acpi, see README for details rutja:~/my_system/acpi4asus-0.29# modprobe asus_acpi /lib/modules/2.4.27-2-386/kernel/drivers/acpi/asus_acpi.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmesg /lib/modules/2.4.27-2-386/kernel/drivers/acpi/asus_acpi.o: insmod /lib/modules/2.4.27-2-386/kernel/drivers/acpi/asus_acpi.o failed /lib/modules/2.4.27-2-386/kernel/drivers/acpi/asus_acpi.o: insmod asus_acpi failed rutja:~/my_system/acpi4asus-0.29# dmesg Linux version 2.4.27-2-386 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 Mon May 16 16:47:51 JST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f740000 (usable) BIOS-e820: 000000001f740000 - 000000001f750000 (ACPI data) BIOS-e820: 000000001f750000 - 000000001f800000 (ACPI NVS) 503MB LOWMEM available. On node 0 totalpages: 128832 zone(0): 4096 pages. zone(1): 124736 pages. zone(2): 0 pages. ACPI: RSDP (v000 ACPIAM ) @ 0x000f5080 ACPI: RSDT (v001 A M I OEMRSDT 0x03000508 MSFT 0x00000097) @ 0x1f740000 ACPI: FADT (v002 A M I OEMFACP 0x03000508 MSFT 0x00000097) @ 0x1f740200 ACPI: MADT (v001 A M I OEMAPIC 0x03000508 MSFT 0x00000097) @ 0x1f740300 ACPI: OEMB (v001 A M I OEMBIOS 0x03000508 MSFT 0x00000097) @ 0x1f750040 ACPI: DSDT (v001 0ABBD 0ABBD001 0x00000001 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 Pentium(tm) Pro APIC version 20 Kernel command line: root=/dev/hda2 ro Found and enabled local APIC! Initializing CPU#0 Detected 600.031 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1196.03 BogoMIPS Memory: 503776k/515328k available (1069k kernel code, 11164k reserved, 459k data, 96k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: After generic, caps: afe9fbff 00000000 00000000 00000000 CPU: Common caps: afe9fbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 08 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 600.0300 MHz. ..... host bus clock speed is 100.0048 MHz. cpu: 0, clocks: 1000048, slice: 500024 CPU0<T0:1000048,T1:500016,D:8,S:500024,C:1000048> ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge PCI: Using IRQ router default [8086/24cc] at 00:1f.0 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabledttyS01 at 0x02f8 (irq = 3) is a 16550A PCI: No IRQ known for interrupt pin B of device 00:1f.6. Please try using pci=biosirq. COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <[EMAIL PROTECTED]> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 3692 blocks [1 disk] into ram disk... done. Freeing initrd memory: 3692k freed VFS: Mounted root (cramfs filesystem). Freeing unused kernel memory: 96k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide: late registration of driver. ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: IC25N080ATMR04-0, ATA DISK drive blk: queue e0025b60, I/O limit 4095Mb (mask 0xffffffff) hdc: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=9729/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 > Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Adding Swap: 1566296k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal Real Time Clock Driver v1.10f hdc: attached ide-cdrom driver. hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 SCSI subsystem driver Revision: 1.00 sbp2: $Rev: 1074 $ Ben Collins <[EMAIL PROTECTED]> ieee1394: sbp2: Driver forced to serialize I/O (serialize_io = 1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: No IRQ known for interrupt pin A of device 01:05.0. Please try using pci=biosirq. PCI: No IRQ known for interrupt pin B of device 01:05.1. Please try using pci=biosirq. Yenta ISA IRQ mask 0x0000, PCI irq 0 Socket status: 30000006 Yenta ISA IRQ mask 0x0000, PCI irq 0 Socket status: 30000006 ohci1394: $Rev: 1045 $ Ben Collins <[EMAIL PROTECTED]> ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[5] MMIO=[fe8ff800-fe8fffff] Max Packet=[2048] 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 at 0xc800, 00:13:d4:7d:f8:81, IRQ 5 eth0: Identified 8139 chip type 'RTL-8100B/8139D' ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000336eb46] scsi0 : SCSI host adapter emulation for IDE ATAPI devices Intel 810 + AC97 Audio, version 1.01, 16:51:32 May 16 2005 PCI: Enabling device 00:1f.5 (0005 -> 0007) PCI: No IRQ known for interrupt pin B of device 00:1f.5. Please try using pci=biosirq. PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0xe100 and 0xe000, MEM 0x1f800400 and 0x1f800600, IRQ 0 i810_audio: unable to allocate irq 0 usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 16:52:03 May 16 2005 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xd480, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xd880, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver PCI: Setting latency timer of device 00:1d.7 to 64 ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 ehci_hcd 00:1d.7: irq 4, pci mem e01bac00 usb.c: new USB bus registered, assigned bus number 4 hub.c: new USB device 00:1d.2-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x458/0x36) is not claimed by any active driver. ehci_hcd 00:1d.7: BIOS handoff failed (104, 1010001) ehci_hcd 00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 32 is not supported by device 00:1d.7 ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 usb.c: USB disconnect on device 00:1d.2-1 address 2 hub.c: USB hub found hub.c: 6 ports detected hub.c: new USB device 00:1d.2-1, assigned address 3 usb.c: USB device 3 (vend/prod 0x458/0x36) is not claimed by any active driver. 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) Intel 810 + AC97 Audio, version 1.01, 16:51:32 May 16 2005 PCI: No IRQ known for interrupt pin B of device 00:1f.5. Please try using pci=biosirq. PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0xe100 and 0xe000, MEM 0x1f800400 and 0x1f800600, IRQ 0 i810_audio: unable to allocate irq 0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001 i810_rng: RNG not detected hw_random: RNG not detected uhci.c: USB Universal Host Controller Interface driver v1.1 usb.c: registered new driver hiddev usb.c: registered new driver hid input: USB HID v1.10 Mouse [Genius NetScroll + Mini Traveler] on usb3:3.0 hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 cs: IO port probe 0x0100-0x04ff: excluding 0x290-0x297 0x378-0x37f 0x4d0-0x4d7 cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc07 cs: IO port probe 0x0a00-0x0aff: clean. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 431M agpgart: Detected an Intel(R) 855GM Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 [drm] AGP 0.99 Aperture @ 0xf0000000 128MB [drm] Initialized i830 1.3.2 20021108 on minor 0 rutja:~/my_system/acpi4asus-0.29#
