Hi Frank, Am Samstag, 30. Juni 2007 01:05 schrieb Frank Feldner: > Try adding a wpa-driver statement: > > iface eth2 inet dhcp > wpa-driver your-driver > wpa-conf /etc/wpa_supplicant/wpa_supplicant.mynet.conf > auto eth2 > > Than debug WPA-SUPPLICANT Client: > sudo wpa_supplicant -i eth2 -D your-driver > -c/etc/wpa_supplicant/wpa_supplicant.conf -d > > Try also: > sudo dhclient eth2 > > Restarting network interface: > sudo ifdown eth2 > sudo ifup eth2 > > Post outputs and syslog entries related to the above activities.
the wext driver is taken by default. Here's the output after manually taking down eth2 (ifdown eth2). Etch-nb:~# ifup --verbose eth2 Configuring interface eth2=eth2 (inet) run-parts --verbose /etc/network/if-pre-up.d run-parts: executing /etc/network/if-pre-up.d/wireless-tools run-parts: executing /etc/network/if-pre-up.d/wpasupplicant wpa_supplicant: using default driver type: wpa-driver wext wpa_supplicant: /sbin/wpa_supplicant -B -P /var/run/wpa_supplicant.eth2.pid -i eth2 -D wext -c /etc/wpa_supplicant/wpa_supplicant.mynet.conf -C /var/run/wpa_supplicant Starting /sbin/wpa_supplicant... wpa_supplicant: ctrl_interface socket located at /var/run/wpa_supplicant/eth2 dhclient3 -pf /var/run/dhclient.eth2.pid -lf /var/lib/dhcp3/dhclient.eth2.leases eth2 Internet Systems Consortium DHCP Client V3.0.4 Copyright 2004-2006 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/eth2/00:1b:77:38:26:de Sending on LPF/eth2/00:1b:77:38:26:de Sending on Socket/fallback DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 8 DHCPOFFER from 192.168.0.1 DHCPREQUEST on eth2 to 255.255.255.255 port 67 DHCPACK from 192.168.0.1 bound to 192.168.0.3 -- renewal in 121643 seconds. run-parts --verbose /etc/network/if-up.d run-parts: executing /etc/network/if-up.d/avahi-daemon run-parts: executing /etc/network/if-up.d/mountnfs run-parts: executing /etc/network/if-up.d/ntpdate run-parts: executing /etc/network/if-up.d/wpasupplicant My config is working, but only at the second try at the end of the bootprocess. Any further ideas? Thank you. Regards Michael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
