Hi, as mentioned in subject, i have a samsung Q45 laptop with a debian testing installed on it. Everything goes very well except the control of fan an LCD brightness.
Even if my question deals with fan and LCD brightness, the information i can give you concern only fan problem (the most annoying thing): As a matter of fact, my sensors results are: ---8<-----8<-----8<-----8<-----8<-----8<-----8<-----8<-----8<-----8<--- acpitz-virtual-0 Adapter: Virtual device temp1: +33.0°C (crit = +100.0°C) temp2: +33.0°C (crit = +100.0°C) coretemp-isa-0000 Adapter: ISA adapter Core 0: +13.0°C (high = +100.0°C, crit = +100.0°C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +23.0°C (high = +100.0°C, crit = +100.0°C) --8<-----8<-----8<-----8<-----8<-----8<-----8<-----8<-----8<-----8<--- But, the problem is that my fan is still running whereas acpitool -f indicates that Fan is off! And as you can see, temperature is not very high and fan is still running... I could accept this noise but it sucks my battery. My kernel is: 2.6.26-1-686 Perhaps does anyone know which module i have to modprobe? I have tried lm-sensors which advised me to charge coretemp module. then: $ lsmod| grep coretemp coretemp 5504 0 Any idea to solve such difficulty? Thank you for help. -- ---()()()----()()()----()()()--)()()(----)()()(----)()()(--- -()----()--()-()-----()----()--)(----)(-----)(-)(--)(----)(- ()----()----()()()----()()()----)()()(----)()()(----)(----)( -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
