> do you have firmware-iwlwifi installed? Yeah.
Sorry, Dirk, I couldn't test yet what you suggested. Tonight I'll see if that makes any difference and I'll also paste here my /etc/network/interfaces. 2010/6/15 Dirk Linnerkamp <[email protected]> > Hi Otto, > > Am Montag, den 14.06.2010, 22:40 -0300 schrieb Otto: > > Hi, I installed Squeeze yesterday and did a aptitude full-upgrade, but > > I can't connect to my wifi router. > > The card is a Intel 3945ABG, which used to work fine in Lenny. > > > ..... > > > > It's weird I can see the router with iwlist scanning but can't > > connect. > > I also tried without WPA, using iwconfig wlan0 essid linux and still > > couldn't get the AP associated. > > > > > > > > > > Any suggestions? > > ...those things mostly happen whef your wireless configuration isn't > correct., for example the wrong "pair-wise" or "group" parameter .Then > you get connected but immediately are disconnected again. > > But before changing something: > > When you run your command "wpa_supplicant" with the -c option you should > give it the full path-lenght as a parameter, for example: > > => "wpa_supplicant -Dwext -iwlan0 -c/etc/wpa_supplicant.conf" > or whereever your config file is located. Put this also into your > "/etc/network/interfaces" to the wlan0 interface block if you are not > using network-manager or wicd as i presume. > > Try this first. > > Best regards > Dirk > > > > > > > -- > To UNSUBSCRIBE, email to [email protected] > with a subject of "unsubscribe". Trouble? Contact > [email protected] > Archive: http://lists.debian.org/[email protected] > >
