That was using
Version: 1.0~a40+20080323.042721
I downgraded to
http://ftp.dk.debian.org/debian/pool/main/l/live-helper/live-helper_1.0~a40-1_all.deb
which seems to skip over this problem like so:
0 packages upgraded, 17 newly installed, 0 to remove and 0 not upgraded.
Need to get 66.7kB/20.2MB of archives. After unpacking 59.4MB will be used.
WARNING: untrusted versions of the following packages will be installed!
Untrusted packages could compromise your system's security.
You should only proceed with the installation if you are certain that
this is what you want to do.
live-initramfs
*** WARNING *** Ignoring these trust violations because
Apt::Get::AllowUnauthenticated is 'true'!
Writing extended state information... Done
So where do we go from here? ;) Kind regards,
x61:~/webc/config-webc/webconverger% sudo lh clean --all
P: Cleaning chroot
x61:~/webc/config-webc/webconverger% sudo lh build
P: Begin caching bootstrap stage...
P: Begin bootstrapping system...
W: skipping bootstrap
P: Begin caching bootstrap stage...
P: Begin caching chroot stage...
P: Begin mounting /dev/pts...
P: Begin mounting /proc...
P: Begin mounting /sys...
P: Configuring file /etc/debian_chroot
P: Configuring file /sbin/start-stop-daemon
P: Configuring file /usr/sbin/policy-rc.d
P: Configuring file /etc/hosts
P: Configuring file /etc/resolv.conf
P: Configuring file /etc/hostname
P: Configuring file /bin/hostname
P: Configuring file /etc/apt/apt.conf
P: Configuring file /etc/apt/sources.list
OK
OK
OK
Get:1 http://debian.virginmedia.com lenny Release.gpg [189B]
Get:2 http://debian.virginmedia.com lenny Release [72.6kB]
Ign http://live.debian.net ./ Release.gpg
Get:3 http://live.debian.net ./ Release.gpg [189B]
Ign http://live.debian.net ./ Release
Get:4 http://ftp.de.debian.org lenny/updates Release.gpg [189B]
Get:5 http://live.debian.net ./ Release [1637B]
Get:6 http://ftp.de.debian.org lenny/updates Release [37.6kB]
Get:7 http://webconverger.com lenny/ Release.gpg [65B]
Get:8 http://debian.virginmedia.com lenny/main Packages/DiffIndex [2038B]
Get:9 http://live.debian.net ./ Packages [1785B]
Get:10 http://live.debian.net ./ Sources [637B]
Get:11 http://webconverger.com lenny/ Release [1481B]
Get:12 http://debian.virginmedia.com lenny/contrib Packages [102kB]
Get:13 http://ftp.de.debian.org lenny/updates/main Packages [184kB]
Get:14 http://debian.virginmedia.com lenny/main Packages [6582kB]
Get:15 http://webconverger.com lenny/ Packages [2592B]
Get:16 http://webconverger.com lenny/ Sources [1051B]
Get:17 http://ftp.de.debian.org lenny/updates/contrib Packages [20B]
Get:18 http://live.debian.net ./ Packages [3140B]
Get:19 http://live.debian.net ./ Sources [1196B]
Fetched 6995kB in 6s (1047kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree... Done
The following packages will be upgraded:
adduser base-files bsdutils coreutils debconf debconf-i18n dhcp3-client
dhcp3-common gcc-4.2-base gcc-4.3-base gnupg gpgv grep
groff-base initscripts iptables libbz2-1.0 libdb4.6 libdevmapper1.02.1
libgcc1 libldap-2.4-2 libnewt0.52 libselinux1 libsigc++-2.0-0c2a
libssl0.9.8 libstdc++6 libtext-charwidth-perl libtext-iconv-perl
libtext-wrapi18n-perl man-db mount netcat netcat-traditional sed
sysv-rc sysvinit sysvinit-utils tzdata util-linux vim-common vim-tiny whiptail
42 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 16.5MB of archives.
After this operation, 1323kB disk space will be freed.
Get:1 http://debian.virginmedia.com lenny/main coreutils 6.10-3 [3749kB]
Get:2 http://debian.virginmedia.com lenny/main grep 2.5.3~dfsg-5 [277kB]
Get:3 http://debian.virginmedia.com lenny/main libselinux1 2.0.59-1 [71.0kB]
Get:4 http://debian.virginmedia.com lenny/main mount 2.13.1-2 [137kB]
Get:5 http://debian.virginmedia.com lenny/main sed 4.1.5-6 [250kB]
Get:6 http://debian.virginmedia.com lenny/main sysvinit 2.86.ds1-54 [111kB]
Get:7 http://debian.virginmedia.com lenny/main libtext-charwidth-perl 0.04-5
[11.1kB]
Get:8 http://debian.virginmedia.com lenny/main libtext-iconv-perl 1.7-1 [16.7kB]
Get:9 http://debian.virginmedia.com lenny/main libtext-wrapi18n-perl 0.06-6
[8828B]
Get:10 http://debian.virginmedia.com lenny/main debconf-i18n 1.5.20 [168kB]
Get:11 http://debian.virginmedia.com lenny/main debconf 1.5.20 [151kB]
Get:12 http://debian.virginmedia.com lenny/main tzdata 2008a-1 [732kB]
Get:13 http://debian.virginmedia.com lenny/main util-linux 2.13.1-2 [525kB]
Get:14 http://debian.virginmedia.com lenny/main base-files 4.0.3 [56.2kB]
Get:15 http://debian.virginmedia.com lenny/main bsdutils 1:2.13.1-2 [61.5kB]
Get:16 http://debian.virginmedia.com lenny/main sysvinit-utils 2.86.ds1-54
[69.5kB]
Get:17 http://debian.virginmedia.com lenny/main gpgv 1.4.6-2.1 [141kB]
Get:18 http://debian.virginmedia.com lenny/main libbz2-1.0 1.0.4-4 [44.4kB]
Get:19 http://debian.virginmedia.com lenny/main libldap-2.4-2 2.4.7-6.1 [184kB]
Get:20 http://debian.virginmedia.com lenny/main gnupg 1.4.6-2.1 [1818kB]
Get:21 http://debian.virginmedia.com lenny/main gcc-4.3-base 4.3.0-1 [105kB]
Get:22 http://debian.virginmedia.com lenny/main libstdc++6 4.3.0-1 [332kB]
Get:23 http://debian.virginmedia.com lenny/main libgcc1 1:4.3.0-1 [25.7kB]
Get:24 http://debian.virginmedia.com lenny/main initscripts 2.86.ds1-54 [66.6kB]
Get:25 http://debian.virginmedia.com lenny/main libdb4.6 4.6.21-6 [562kB]
Get:26 http://debian.virginmedia.com lenny/main libdevmapper1.02.1 2:1.02.24-4
[51.9kB]
Get:27 http://debian.virginmedia.com lenny/main sysv-rc 2.86.ds1-54 [61.6kB]
Get:28 http://debian.virginmedia.com lenny/main adduser 3.106 [183kB]
Get:29 http://debian.virginmedia.com lenny/main dhcp3-client 3.1.0-5 [217kB]
Get:30 http://debian.virginmedia.com lenny/main dhcp3-common 3.1.0-5 [283kB]
Get:31 http://debian.virginmedia.com lenny/main groff-base 1.18.1.1-19 [846kB]
Get:32 http://debian.virginmedia.com lenny/main iptables 1.4.0-3 [403kB]
Get:33 http://debian.virginmedia.com lenny/main libnewt0.52 0.52.2-11.2 [67.2kB]
Get:34 http://debian.virginmedia.com lenny/main libsigc++-2.0-0c2a 2.0.18-2
[34.7kB]
Get:35 http://debian.virginmedia.com lenny/main libssl0.9.8 0.9.8g-7 [2900kB]
Get:36 http://debian.virginmedia.com lenny/main man-db 2.5.1-3 [997kB]
Get:37 http://debian.virginmedia.com lenny/main netcat-traditional 1.10-37
[68.1kB]
Get:38 http://debian.virginmedia.com lenny/main netcat 1.10-37 [5970B]
Get:39 http://debian.virginmedia.com lenny/main vim-tiny 1:7.1-266+1 [319kB]
Get:40 http://debian.virginmedia.com lenny/main vim-common 1:7.1-266+1 [204kB]
Get:41 http://debian.virginmedia.com lenny/main whiptail 0.52.2-11.2 [34.8kB]
Get:42 http://debian.virginmedia.com lenny/main gcc-4.2-base 4.2.3-2 [105kB]
Fetched 16.5MB in 9s (1802kB/s)
Extracting templates from packages: 100%
Preconfiguring packages ...
(Reading database ... 7327 files and directories currently installed.)
Preparing to replace coreutils 5.97-5.3 (using .../coreutils_6.10-3_i386.deb)
...
Unpacking replacement coreutils ...
Setting up coreutils (6.10-3) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace grep 2.5.3~dfsg-3 (using .../grep_2.5.3~dfsg-5_i386.deb)
...
Unpacking replacement grep ...
Setting up grep (2.5.3~dfsg-5) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace libselinux1 2.0.15-2+b1 (using
.../libselinux1_2.0.59-1_i386.deb) ...
Unpacking replacement libselinux1 ...
Setting up libselinux1 (2.0.59-1) ...
init: timeout opening/writing control channel /dev/initctl
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace mount 2.13.1-1 (using .../mount_2.13.1-2_i386.deb) ...
Unpacking replacement mount ...
Setting up mount (2.13.1-2) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace sed 4.1.5-5 (using .../archives/sed_4.1.5-6_i386.deb) ...
Unpacking replacement sed ...
Setting up sed (4.1.5-6) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace sysvinit 2.86.ds1-53 (using
.../sysvinit_2.86.ds1-54_i386.deb) ...
Unpacking replacement sysvinit ...
Setting up sysvinit (2.86.ds1-54) ...
init: timeout opening/writing control channel /dev/initctl
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace libtext-charwidth-perl 0.04-4 (using
.../libtext-charwidth-perl_0.04-5_i386.deb) ...
Unpacking replacement libtext-charwidth-perl ...
Setting up libtext-charwidth-perl (0.04-5) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace libtext-iconv-perl 1.4-3 (using
.../libtext-iconv-perl_1.7-1_i386.deb) ...
Unpacking replacement libtext-iconv-perl ...
Setting up libtext-iconv-perl (1.7-1) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace libtext-wrapi18n-perl 0.06-5 (using
.../libtext-wrapi18n-perl_0.06-6_all.deb) ...
Unpacking replacement libtext-wrapi18n-perl ...
Setting up libtext-wrapi18n-perl (0.06-6) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace debconf-i18n 1.5.19 (using
.../debconf-i18n_1.5.20_all.deb) ...
Unpacking replacement debconf-i18n ...
Setting up debconf-i18n (1.5.20) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace debconf 1.5.19 (using .../debconf_1.5.20_all.deb) ...
Unpacking replacement debconf ...
Setting up debconf (1.5.20) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace tzdata 2007k-4 (using .../tzdata_2008a-1_all.deb) ...
Unpacking replacement tzdata ...
Setting up tzdata (2008a-1) ...
Current default timezone: 'Etc/UTC'
Local time is now: Tue Mar 25 00:33:32 UTC 2008.
Universal Time is now: Tue Mar 25 00:33:32 UTC 2008.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace util-linux 2.13.1-1 (using
.../util-linux_2.13.1-2_i386.deb) ...
Unpacking replacement util-linux ...
Setting up util-linux (2.13.1-2) ...
Installing new version of config file /etc/init.d/hwclock.sh ...
Installing new version of config file /etc/init.d/hwclockfirst.sh ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace base-files 4.0.2 (using .../base-files_4.0.3_i386.deb) ...
Unpacking replacement base-files ...
Setting up base-files (4.0.3) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace bsdutils 1:2.13.1-1 (using
.../bsdutils_1%3a2.13.1-2_i386.deb) ...
Unpacking replacement bsdutils ...
Setting up bsdutils (1:2.13.1-2) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace sysvinit-utils 2.86.ds1-53 (using
.../sysvinit-utils_2.86.ds1-54_i386.deb) ...
Unpacking replacement sysvinit-utils ...
Setting up sysvinit-utils (2.86.ds1-54) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace gpgv 1.4.6-2+b1 (using .../gpgv_1.4.6-2.1_i386.deb) ...
Unpacking replacement gpgv ...
Setting up gpgv (1.4.6-2.1) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace libbz2-1.0 1.0.4-3 (using .../libbz2-1.0_1.0.4-4_i386.deb)
...
Unpacking replacement libbz2-1.0 ...
Setting up libbz2-1.0 (1.0.4-4) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace libldap-2.4-2 2.4.7-5 (using
.../libldap-2.4-2_2.4.7-6.1_i386.deb) ...
Unpacking replacement libldap-2.4-2 ...
Setting up libldap-2.4-2 (2.4.7-6.1) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace gnupg 1.4.6-2+b1 (using .../gnupg_1.4.6-2.1_i386.deb) ...
Unpacking replacement gnupg ...
Setting up gnupg (1.4.6-2.1) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace gcc-4.3-base 4.3-20080202-1 (using
.../gcc-4.3-base_4.3.0-1_i386.deb) ...
Unpacking replacement gcc-4.3-base ...
Setting up gcc-4.3-base (4.3.0-1) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace libstdc++6 4.3-20080202-1 (using
.../libstdc++6_4.3.0-1_i386.deb) ...
Unpacking replacement libstdc++6 ...
Setting up libstdc++6 (4.3.0-1) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace libgcc1 1:4.3-20080202-1 (using
.../libgcc1_1%3a4.3.0-1_i386.deb) ...
Unpacking replacement libgcc1 ...
Setting up libgcc1 (1:4.3.0-1) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace initscripts 2.86.ds1-53 (using
.../initscripts_2.86.ds1-54_i386.deb) ...
Unpacking replacement initscripts ...
Setting up initscripts (2.86.ds1-54) ...
Installing new version of config file /etc/init.d/mountnfs.sh ...
Installing new version of config file /etc/init.d/sendsigs ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace libdb4.6 4.6.21-5 (using .../libdb4.6_4.6.21-6_i386.deb)
...
Unpacking replacement libdb4.6 ...
Setting up libdb4.6 (4.6.21-6) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace libdevmapper1.02.1 2:1.02.24-3 (using
.../libdevmapper1.02.1_2%3a1.02.24-4_i386.deb) ...
Unpacking replacement libdevmapper1.02.1 ...
Setting up libdevmapper1.02.1 (2:1.02.24-4) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace sysv-rc 2.86.ds1-53 (using
.../sysv-rc_2.86.ds1-54_all.deb) ...
Unpacking replacement sysv-rc ...
Setting up sysv-rc (2.86.ds1-54) ...
(Reading database ... 7324 files and directories currently installed.)
Preparing to replace adduser 3.105 (using .../archives/adduser_3.106_all.deb)
...
Unpacking replacement adduser ...
Preparing to replace dhcp3-client 3.1.0-3 (using
.../dhcp3-client_3.1.0-5_i386.deb) ...
Unpacking replacement dhcp3-client ...
Preparing to replace dhcp3-common 3.1.0-3 (using
.../dhcp3-common_3.1.0-5_i386.deb) ...
Unpacking replacement dhcp3-common ...
Preparing to replace groff-base 1.18.1.1-16 (using
.../groff-base_1.18.1.1-19_i386.deb) ...
Unpacking replacement groff-base ...
Preparing to replace iptables 1.3.8.0debian1-1 (using
.../iptables_1.4.0-3_i386.deb) ...
Unpacking replacement iptables ...
Preparing to replace libnewt0.52 0.52.2-11.1 (using
.../libnewt0.52_0.52.2-11.2_i386.deb) ...
Unpacking replacement libnewt0.52 ...
Preparing to replace libsigc++-2.0-0c2a 2.0.17-2 (using
.../libsigc++-2.0-0c2a_2.0.18-2_i386.deb) ...
Unpacking replacement libsigc++-2.0-0c2a ...
Preparing to replace libssl0.9.8 0.9.8g-4 (using
.../libssl0.9.8_0.9.8g-7_i386.deb) ...
Unpacking replacement libssl0.9.8 ...
Preparing to replace man-db 2.5.1-2 (using .../man-db_2.5.1-3_i386.deb) ...
Unpacking replacement man-db ...
Preparing to replace netcat-traditional 1.10-36 (using
.../netcat-traditional_1.10-37_i386.deb) ...
Unpacking replacement netcat-traditional ...
Preparing to replace netcat 1.10-36 (using .../netcat_1.10-37_all.deb) ...
Unpacking replacement netcat ...
Preparing to replace vim-tiny 1:7.1-245+1 (using
.../vim-tiny_1%3a7.1-266+1_i386.deb) ...
Unpacking replacement vim-tiny ...
Preparing to replace vim-common 1:7.1-245+1 (using
.../vim-common_1%3a7.1-266+1_i386.deb) ...
Unpacking replacement vim-common ...
Preparing to replace whiptail 0.52.2-11.1 (using
.../whiptail_0.52.2-11.2_i386.deb) ...
Unpacking replacement whiptail ...
Preparing to replace gcc-4.2-base 4.2.3-1 (using
.../gcc-4.2-base_4.2.3-2_i386.deb) ...
Unpacking replacement gcc-4.2-base ...
Setting up adduser (3.106) ...
Setting up dhcp3-common (3.1.0-5) ...
Setting up dhcp3-client (3.1.0-5) ...
Setting up groff-base (1.18.1.1-19) ...
Setting up iptables (1.4.0-3) ...
Setting up libnewt0.52 (0.52.2-11.2) ...
Setting up libsigc++-2.0-0c2a (2.0.18-2) ...
Setting up libssl0.9.8 (0.9.8g-7) ...
Setting up man-db (2.5.1-3) ...
Setting up netcat-traditional (1.10-37) ...
Setting up netcat (1.10-37) ...
Setting up vim-common (1:7.1-266+1) ...
Installing new version of config file /etc/vim/vimrc ...
Setting up vim-tiny (1:7.1-266+1) ...
Setting up whiptail (0.52.2-11.2) ...
Setting up gcc-4.2-base (4.2.3-2) ...
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
P: Configuring file /etc/kernel-img.conf
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
aufs-modules-2.6.22-3-486 aufs-modules-2.6.22-3-686 busybox file
initramfs-tools klibc-utils libklibc libmagic1 libvolume-id0
linux-image-2.6.22-3-486 linux-image-2.6.22-3-686
squashfs-modules-2.6.22-3-486 squashfs-modules-2.6.22-3-686 sudo udev user-setup
Suggested packages:
grub lilo linux-doc-2.6.22 genext2fs squashfs-tools mtd-tools
Recommended packages:
libc6-i686 eject live-initscripts
The following NEW packages will be installed:
aufs-modules-2.6-486 aufs-modules-2.6-686 aufs-modules-2.6.22-3-486
aufs-modules-2.6.22-3-686 busybox file initramfs-tools klibc-utils
libklibc libmagic1 libvolume-id0 linux-image-2.6-486 linux-image-2.6-686
linux-image-2.6.22-3-486 linux-image-2.6.22-3-686
live-initramfs squashfs-modules-2.6-486 squashfs-modules-2.6-686
squashfs-modules-2.6.22-3-486 squashfs-modules-2.6.22-3-686 sudo udev
user-setup
0 upgraded, 23 newly installed, 0 to remove and 0 not upgraded.
Need to get 18.5MB/38.7MB of archives.
After this operation, 112MB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
live-initramfs
E: There are problems and -y was used without --force-yes
x61:~/webc/config-webc/webconverger% sudo chroot chroot /bin/sh
sh-3.1# apt-cache show live-initramfs
Package: live-initramfs
Priority: optional
Section: misc
Installed-Size: 380
Maintainer: Debian Live <[EMAIL PROTECTED]>
Architecture: all
Version: 1.124.1+20080323.041756
Depends: busybox, file, initramfs-tools, sudo, udev, user-setup
Recommends: eject, wget, live-initscripts
Suggests: genext2fs, squashfs-tools, mtd-tools
Filename: ./live-initramfs_1.124.1+20080323.041756_all.deb
Size: 66708
MD5sum: 81527f43cd7b5d9ba9c6d69dab85698d
SHA1: 788039f55bc853b57ad7d4104da3c6e50ad07466
SHA256: ae2ea25dbe6fe87b00616dd6d196a56e1238390b44ff5a37fe761cf92f116a8e
Description: Debian Live initramfs hook
live-initramfs is a hook for the initramfs-tools, used to generate a initramfs
capable to boot live systems, such as those created by live-helper. This
includes the Debian Live isos, netboot tarballs, and usb stick images.
.
At boot time it will look for a (read-only) media containing a "/live"
directory where a root filesystems (often a compressed filesystem image like
squashfs) is stored. If found, it will create a writable environment, using
unionfs, for Debian like systems to boot from.
.
You probably do not want to install this package onto a non-live system,
although it will do no harm.
.
live-initramfs is a fork of casper <http://packages.ubuntu.com/casper/>.
Package: live-initramfs
Priority: optional
Section: misc
Installed-Size: 376
Maintainer: Debian Live <[EMAIL PROTECTED]>
Architecture: all
Version: 1.119.1-1
Depends: busybox, file, initramfs-tools, sudo, udev, user-setup
Recommends: eject, live-initscripts, wget
Suggests: genext2fs, mtd-tools, squashfs-tools
Filename: pool/main/l/live-initramfs/live-initramfs_1.119.1-1_all.deb
Size: 66314
MD5sum: 0913455be195c834e67bfef157d532ab
SHA1: f74b5ad7e6f9fd90ac67426bb519b3a4e7871f4d
SHA256: e3cb6a2d9787511c6d3cb3a890cd4e2b77bfbd49baaebe6c51c05c6f05782abc
Description: Debian Live initramfs hook
live-initramfs is a hook for the initramfs-tools, used to generate a initramfs
capable to boot live systems, such as those created by live-helper. This
includes the Debian Live isos, netboot tarballs, and usb stick images.
.
At boot time it will look for a (read-only) media containing a "/live"
directory where a root filesystems (often a compressed filesystem image like
squashfs) is stored. If found, it will create a writable environment, using
unionfs, for Debian like systems to boot from.
.
You probably do not want to install this package onto a non-live system,
although it will do no harm.
.
live-initramfs is a fork of casper <http://packages.ubuntu.com/casper/>.
Homepage: http://debian-live.alioth.debian.org/
Tag: admin::boot, interface::commandline
sh-3.1#
sh-3.1#
sh-3.1#
sh-3.1# exit
x61:~/webc/config-webc/webconverger%
_______________________________________________
debian-live-devel mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/debian-live-devel
