I have a Gateway Qube also. Have you tried reading the serial port output? I was able to get mine loaded after alot of hassles with the NFS and DHCP setup.
On Fri, 28 Jan 2005 13:37:13 +0000, Lists - Kush-T <[EMAIL PROTECTED]> wrote: > Hi list > > I'm having some trouble installing Debian on a Qube2. It's actually the > Gateway version, with PCI modem installed. > > I'm following the instructions at > http://www.cyrius.com/debian/cobalt/sarge.html > > I have set up the NFS server and DHCP server successfully. > > On netbooting the Qube, it shows "Net booting" for a few seconds, then > it very briefly shows "128,128->265" (I presume this indicates the RAM > present - I have 2 x 128MB sticks fitted) before showing the boot menu. > On choosing "NFS" the unti then shows "UNIT BOOT FAILED". :-s > > Looking at the output from TCPDUMP, it looks like the unit is picking up > an IP address fine. Further than that is over my head! > > Can anyone point me in the right direction here? I've included the > output from TCPDUMP below. 192.168.0.38 is the DHCP server. > wiggum.prov.road is the firewall/gateway. > > TIA. Pete <snip log dump> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
