On Wed, 21 Jun 2000, Ian Chilton wrote: > I have an SGI Indy, with 2 internal hard disks, a 4GB and a 1GB > > I get the same thing! > > > > Also I'm getting a message > > sc1,2,0: cmd=0x12 timeout after 2 sec. Resetting SCSI bus > > I started getting this when I added the 2nd HD (1GB). >
fwiw, i got this too on my indy when i added a Quantum Empire 1GB. >From cold boot the PROM doesn't recognise the second disk, but IRIX does (PROM gives me the exact same error message as the one you wrote above - but prints it twice). If i halt back to PROM then the PROM does see the second disk. (and only prints that error message once) my theories are: 1. PROM controller driver is minimal and doesn't init the controller/disks properly whereas the IRIX driver does. 2. disk spin up times.. ?? 3. Perhaps cause the outboard SCSI port is not terminated. (least not on my indy) > -- Paul Jakma [EMAIL PROTECTED] PGP5 key: http://www.clubi.ie/jakma/publickey.txt ------------------------------------------- Fortune: Give me a fish and I will eat today. Teach me to fish and I will eat forever.
