Thiemo Seufer wrote:
On Mon, Mar 20, 2006 at 08:45:31PM +0100, Eugen Paiuc wrote:
Martin Michlmayr wrote:
* Eugen Paiuc <[EMAIL PROTECTED]> [2006-03-20 19:32]:
I turn around this box, trying to install a debian...
I prepared a tftp server for, but I can't have any succes.
What problem did you see _exactly_?
Have you read http://www.pvv.org/~pladsen/Indy/HOWTO.html and
http://www.zorg.org/linux/indy.shtml
not exactly , but others yes,
They tell you how you need to
configure your TFTP server so it'll work.
I'll try again.
it seems that dhcpd - tftp are ok, I made a new add :
* |unsetenv netaddr|
* |bootp(): root=/dev/ram0|
but I have the same issue:
"Unable to execute bootp()":root=/dev/ram - the last try -
The syntax is:
bootp():
with the root filesystem being the default anyway. From the error
message it looks like you typed
bootp() :root=/dev/ram
Note the space is in a different place.
The syntax was correct; that my I quated the message with "" to say
"the same message
I receive for everyting I tryed.
Server is: Linux p22 2.6.15-1-686 #2 Mon Mar 6 15:27:08 UTC 2006 i686
GNU/Linux
tail /var/log/daemon.log:
Mar 20 20:20:52 p22 dhcpd: BOOTREQUEST from 0x:0x:xx:0x:x0:xx via eth0
(non-rfc1048)
Mar 20 20:20:52 p22 dhcpd: BOOTREPLY for 192.168.1.33 to sgi
(0x:0x:xx:0x:x0:xx) via eth0
On a server I see only this two "bootp" replay each time a start a
bootp(). nothing moore...
Ah, and I can't ping the sgi box .
Normal, the firmware doesn't reply to ping requests.
Nice !
Thiemo
Thanks again.
Regards,
Eugen
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
