Martin Michlmayr schrieb: > * Thorsten Zieleit <[EMAIL PROTECTED]> [2008-03-17 22:50]: > >>> Please take the installer from etch, replace the kernel with >>> http://merkel.debian.org/~tbm/tmp/vmlinux-2.6.18-6-r5k-cobalt and let >>> me know whether it works. >>> >>> >> Today came the RaQ1 with 64MB RAM and 10GB HD. >> >> I installed Debian with the kernel above (also changed the default.colo >> to point to the new kernel). Installation (on serial console) - no problem. >> >> After installation and reboot the last thing I see in the serial console >> (screen /dev/ttyS0 115200) is: >> > > The kernel above has support for the serial console on the RaQ1 > whereas the kernel in the archive doesn't. So what you're seeing is > expected. You could take out the hard drive, connect it to another > machine and replace the kernel file on the disk with the one above. > Alternatively, you could do another installation and before the > installer restarts, you could open a shell, chroot into the system and > install openssh-server. > > Stupid me. ;) OK understood. The installer loads the "old" kernel from the net and doesn't use the one of /nfsroot.
I took out the HD and overwrite the kernel with above and it works now: raqian1:~# uptime 21:55:06 up 2 min, 2 users, load average: 0.33, 0.33, 0.14 raqian1:~# uname -a Linux raqian1 2.6.18-6-r5k-cobalt #1 Mon Feb 25 19:30:05 UTC 2008 mips GNU/Linux raqian1:~# cat /proc/cpuinfo system type : Cobalt RaQ processor : 0 cpu model : Nevada V1.0 FPU V1.0 BogoMIPS : 148.99 wait instruction : yes microsecond timers : yes tlb_entries : 48 extra interrupt vector : yes hardware watchpoint : no ASEs implemented : VCED exceptions : not available VCEI exceptions : not available Please let me know if I should do some tests for you. Do you think I should test the 2.6.25 on the RaQ1? (How can I do this?) And thanks for your efforts and all the good work! Cheers Thorsten -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
