Hi Sameer, Martin, Le mardi 17 novembre 2009 21:49:52, Martin Michlmayr a écrit : > * Sameer Verma <[email protected]> [2009-09-14 11:51]: > > I noticed that on Lenny for Qube2, the green LED flickers with disk > > activity, but stays 'off' otherwise. Can this be changed to a constant > > 'on' like before? I kinda like my office to be bathed in the eerie > > green glow at night :-) > > I don't have a Qube2 so I cannot test it, but the following should > work: > > modprobe ledtrig-default-on > > # 2.6.31 and lower > echo default-on > > /sys/devices/platform/cobalt-qube-leds/leds/qube-front/trigger > > # 2.6.32 and higher > echo default-on > > /sys/devices/platform/cobalt-qube-leds/leds/qube::front/trigger We might want the following patch to restore the usual behavior, if it is fine with you I can send this upstream. --- diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c index 8816806..81b2014 100644 --- a/drivers/leds/leds-cobalt-qube.c +++ b/drivers/leds/leds-cobalt-qube.c @@ -31,7 +31,7 @@ static struct led_classdev qube_front_led = { .name = "qube::front", .brightness = LED_FULL, .brightness_set = qube_front_led_set, - .default_trigger = "ide-disk", + .default_trigger = "default-on", }; static int __devinit cobalt_qube_led_probe(struct platform_device *pdev)
-- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
