On Fri, Dec 14, 2012 at 10:49:52AM +0800, Fuxin Zhang wrote: > 于 2012/12/14 0:46, Roland Kammerer 写道: > >Hello guys, > > > >I tried to install debian with the daily image of today[1] on my Fuloong > >Mini, but the install failed. > > > >I did the following: > >*) put the three files on an ext2 formatted usb stick > >*) boot to pmon > >*) bl -d ide (usb0,0)/boot.cfg # and select d-i boot from the menu > > > >I also tried to manually load the kernel and initrd with the same > >result: > > > >Both methods (manually and "bl") load the kernel and the initrd fine, > >but after that I just get the register dump. > BTW:“bl" should be "al" --> auto load?
not sure about that. I used "bl" and at least that part worked. I found the "bl" version here on the yeeloong wiki page ( http://wiki.debian.org/DebianYeeloong/HowTo/Install ). "al" leads to "command not found". > A register dump normally means early kernel panic(before the > framebuffer console is initialized and used), > are you sure the kernel is ok? It isn't a register dump from the kernel, sorry I should have made that clear. It is that kind of register dump that comes from pmon/the fuloong. That is even before the kernel kicks in. If I load "vmlinux" and "initrd.gz" manually, it is that kind of dump that happens right after I press "g". Definitely not a kernel dump. Regards, rck -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
