Hello, it failed, but with different error, this time.
Since it failed on lucatelli, I tried to build it again, but this time on Cavium boards. It failed for both, mips and mipsel build, with the same error as last try one lucatelli: > echo "Testing tu5-sapt..." > Testing tu5-sapt... > /usr/bin/make -C tu5-sapt; true > ......... > Build killed with signal TERM after 300 minutes of inactivity As I see from debian build logs for psi4, it was successfully built only ones on eberlin, which is a Loongsoon 3A. Beside of that, Anibal and I built it successfully on non-Cavium boards. It seems to me that this error could be Cavium specific issue. I will try to further investigate this behavior. ________________________________________ From: Anibal Monsalve Salazar [[email protected]] on behalf of Aníbal Monsalve Salazar [[email protected]] Sent: Saturday, April 05, 2014 7:20 PM To: Aurelien Jarno Cc: [email protected]; [email protected]; Dejan Latinovic Subject: Re: please give-back psi4 on mips On Fri, 2014-04-04 19:35:41 +0200, Aurelien Jarno wrote: > On Fri, Apr 04, 2014 at 10:43:11AM +0000, Aníbal Monsalve Salazar wrote: >> >> Please give-back psi4 on mips. >> >> It builds fine for Dejan and myself on two different machines. >> >> gb psi4 . mips > > Done. Failed. Dejan thinks it fails possibly because of not enough RAM. According to https://db.debian.org/machines.cgi?host=lucatelli lucatelli is a 16 x Cavium Octeon V0.3 with 1.8G. Its RAM is about the same I'm using to build psi4 with pbuilder. I could upload my binary package and my pbuilder log file if required. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/[email protected]
