There was one problem, stradis the driver does not work in Linux with PM-1053 board (analogue IVC-2100) from Cirrus CS92210 MPEG2 Codec. There is a system debian etch with a kernel 2.6.17 on PC/104.
#dmesg ... Linux video capture interface: v1.00 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 saa7146: register extension 'Multimedia eXtension Board'. PCI: Found IRQ 11 for device 0000:00:0b.0 PCI: Sharing IRQ 11 with 0000:00:0f.0 saa7146: found saa7146 @ mem cf8e6000 (revision 1, irq 11) (0x0000, 0x0000). ... mxb: did not find all i2c devices. Aborting saa7146: register extension 'hexuim HV-PC16 Orion'. PCI: Found IRQ 11 for device 0000:00:0b.0 PCI: Sharing IRQ 11 with 0000:00:0f.0 saa7146: found saa7146 @ mem cf8e6000 (revision 1, irq 11) (0x0000, 0x0000). saa7146: register extension 'dpc7146 demonstration board'. PCI: Found IRQ 11 for device 0000:00:0b.0 PCI: Sharing IRQ 11 with 0000:00:0f.0 saa7146: found saa7146 @ mem cf8e6000 (revision 1, irq 11) (0x0000, 0x0000). ... #modprobe stradis stradis 0000:00:0b.0: 0: rev1 decoder PCI: Found IRQ 11 for device 0000:00:0b.0 PCI: Sharing IRQ 11 with 0000:00:0f.0 videodev: «SAA7146A» has no releale callback. Please fix your driver for proper sysfs support, see http://lwn.net/Articles/36850/ i2c setup read timeout i2c read timeout i2c setup read timeout i2c read timeout ... The device /dev/video0 is done, but does not work. If you can help somehow, write please to [EMAIL PROTECTED] (it is Ukraine.) Thankful in advance. PS: prompt some good framegrabber with drivers for Linux for 104 platform plase.
