On Fri, 24 Jun 2016 12:28:50 +0200 Nicolas George <[email protected]> wrote:
> Le septidi 7 messidor, an CCXXIV, Dominique Dumont a écrit : > > This message indicates that the key no longer replies on the usb bus. It > > may > > be due to a bad hardware, a bug in firmware (or wrong firmware or wrong > > version). > > These are the likely causes, but note that the fault does not necessarily > lies in the device, it can also be a problem with the USB hub. I have > observed different kinds of devices (card readers, wireless keyboard > dongles) working when connected to one hub and not on another. I have tried other USB ports (I'm not using a hub), but still can't get it working (get the same message). > > In my experience, only hauppauge HW works fine (admitedly, my experience is > > based on 5 devices which is not statistically significant) > > I can vouch that this device: > > ID 0ccd:0078 TerraTec Electronic GmbH Cinergy T XXS > > has been working quite well for seven years, even surviving the switch to > HD. (The IR remote control receiver does not receive anything despite > appearing as an input device, though; but a wireless numpad does the trick > as well; and maybe I am missing something to enable it.) > > In general, for hardware support, I would trust the authors' wiki: > > https://linuxtv.org/wiki/index.php/DVB-T_USB_Devices Yes, I looked up the DVT-T2 page on linuxtv.org. Thank you (and Dominique) for your help.
