�rjan Kaddik <[EMAIL PROTECTED]> writes:
Hi everybody!
Im trying to install kernel and modules on a PowerCenter 150(/w
g3-300 upgrade), without any luck!
w. dbootstrap:
First: trouble mounting loop-device, rescue.bin & driver-1.bin, pmac
You need a kernel with a loop-device for this to work. In the end, if
you're using bootx, you don't need to install a kernel. As for the
modules, you will probably have to manually untar them into the
appropriate subdir of /lib/modules. But for now, just skip this step
and continue with the install. Once you get your base system
installed and configured, you can worry about your modules.
My base-system is setup to the point that I need to get out and get
more stuff, so I'm stucked on the modules! (and I really need to get
ppp functional to get my machine to required status...)
/�rjan Kaddik
/[EMAIL PROTECTED]
--
V�nliga h�lsningar:
�rjan Kaddik Email: [EMAIL PROTECTED]
Fj�rdingsmansv. 184 alternativ: [EMAIL PROTECTED]
192 70 SOLLENTUNA hemsida: www.t.kth.se/t97_kkn/
Tel: 08-626 78 22 Mob: 070-526 78 22
Tel: 08-594 732 30 Fax: 08-594 732 31
PGP, use it! Get my public key from:
http://keys.pgp.com:11371/pks/lookup?op=get&search=0x9D099E1F
Get your PGP at http://web.mit.edu/network/pgp.html
