On Mon, Jan 01, 2001 at 10:29:28PM +0900, Marshal Wong wrote:
> Hello all. I hope you've all had a great new year.
>
> I'm trying to get X at 1024x768 on a Powerbook firewire. Has anyone been
> successful in such a situation? I have a sneaking suspiction that the
> reason none of the modelines for higher resoutions are accepted is because
> the frequecys for the monitor are too low in XF86config. However, I don't
> know, and have been unable to find, the information for the LCD screens
> frequencies. So any help or information would be appreciated. Thanks!
I�ve created a config 3 hours ago. It�s for XFree4 ...
I send you my XF86Config with this mail.
If you install xserver-xfree86 you can configure you xserver. If you choose
medium when the question to set the screen appears you can set 1024X768 at 60
hz ...
everthing should work perfect if you set the keyboard right ;)
cu,
mfl
>
> Marshal
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>
>
--
Michael Flaig ... PROLinux (www.pro-linux.de)
News, free web support and discussion forum
MobilePhone: +49 179 2200049
# XF86Config-4 (XFree86 server configuration file) generated by Dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config manual page.
# (Type "man XF86Config" at the shell prompt.)
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "ServerFlags"
EndSection
Section "Module"
Load "ddc"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
Load "bitmap"
Load "freetype"
Load "speedo"
Load "type1"
Load "vbe"
Load "int10"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "AutoRepeat" "100 50"
# If the keyboard layout is fscked, try this
# Option "XkbDisable"
Option "XkbLayout" "de"
Option "XkbOptions" "ctrl:nocaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "macintosh"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/gpmdata"
Option "Protocol" "MouseSystems"
# Option "Protocol" "IntelliMouse"
# Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "ati"
VideoRam 8092
BusID "PCI:0:16:0"
Option "UseFBDev"
Option "XAANoDashedBresenhamLine"
EndSection
# General Framebuffer Device driver
Section "Device"
Identifier "FBDev"
Driver "fbdev"
# Fill in the correct PCI ID for your graphics device here!
BusID "PCI:0:16:0"
# If you don't want to use the standard framebuffer device
Option "fbdev" "/dev/fb1"
Option "ShadowFB" "on"
# This is mainly for reducing network traffic for remote display
# Option "BackingStore"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28-49
VertRefresh 43-72
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Generic Mouse" "CorePointer"
EndSection
Section "DRI"
Mode 0666
EndSection
# end of XF86Config
