Package: pmud 0.7-3 for powerpc Kernel: linux 2.2.18 from ftp.kernel.org gcc 2.95.2-20 libc6 2.2.1-1 XFree 4.0.2-1 System: Apple PowerBook G3-400 (Lombard)
Description of bug: Situation before sleep: ======================= the system uses /dev/input/mouse0 as core-pointer, and /dev/input/mouse1 as external USB pointer. The relative settings in the /etc/X11/XF86Config-4 file are as follows: >Section "ServerLayout" > Identifier "XFree86 Configured" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse1" "CorePointer" > InputDevice "Mouse2" "SendCoreEvents" > InputDevice "Keyboard0" "CoreKeyboard" >EndSection ># ADB Mouse (TrackPad) >Section "InputDevice" > Identifier "Mouse1" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/input/mouse0" >EndSection ># USB Mouse (external) >Section "InputDevice" > Identifier "Mouse2" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/input/mouse1" > Option "Buttons" "5" > Option "ZAxisMapping" "4 5" >EndSection Both devices are active and working at boot time, infact: >input0: Macintosh mouse button emulation >ADB mouse at 3, handler set to 4 (trackpad) >mouse0: PS/2 mouse device for input3 >mouse1: PS/2 mouse device for input0 >mice: PS/2 mouse device common for all mice and XF4 is able to see them properly. So far so good. Situation after sleep: ====================== At wake-up, the core pointer is unable to move. As root, I stop gdm, then restart it. XF4 is not able to restart, and /var/log/XFree86.0.log reports the following error: > (EE) xf86OpenSerial: Cannot open device /dev/input/mouse0 > No such device. > (EE) Mouse1: cannot open input device > (EE) PreInit failed for input device "Mouse1" > > (II) UnloadModule: "mouse" > (**) Option "Protocol" "IMPS/2" > (**) Mouse2: Protocol: "IMPS/2" > (**) Option "SendCoreEvents" > (**) Mouse2: always reports core events > (**) Option "Device" "/dev/input/mouse1" > (**) Option "Buttons" "5" > (**) Mouse2: Buttons: 5 > (**) Option "ZAxisMapping" "4 5" > (**) Mouse2: ZAxisMapping: buttons 4 and 5 > (II) Keyboard "Keyboard0" handled by legacy driver > (WW) No core pointer registered > (II) XINPUT: Adding extended input device "Mouse2" (type: MOUSE) > No core pointer > > Fatal server error: > failed to initialize core devices > I believe pmud does not wake up /dev/mouse0. It does seem to wake up /dev/mouse1, as from the log. When using /dev/input/mice I had no such problems. Additional infos available on request. Regards. Sergio
