>>> Shaun Kruger <[EMAIL PROTECTED]> 03.12.2001 15.56 Uhr >>> > If you would like a cross compile environment you can go to > http://linuxhost.cc/~shaun/powerpc.tar.gz and that has the build > environment we use at work.
Thank you very much! I'm downloading it right now. In fact, we only have an ISDN link at work :-(. > prompt with "load_ramdisk=1 prompt_ramdisk=1 root=/dev/initrd" with this Try "root=/dev/ram" instead. If this does not work, you might also try putting "/dev/fd0" as root instead. It should work when you also pass the "load_ramdisk=1" parameter. > Let me know if you find anything. I worked all weekend on this and I > barely got it panicing over no root filesystem. Good luck. Somehow the RS/6000 does not boot from diskette any more :-(. Since my last tries with Linux, I have booted the freshly-installed AIX. Unfortunately, I get no login prompt on the serial console, and the machine does not seem to have an IP address set :(. --benny.
