Question: The Ethernet card of my PowerBookG3 doesn't get recognized by my updated Woody.
During boot, I get: SCIOCSIFADDR: no such device eth0: error while getting interface flags: no such device and in fact, lspci gives me only this: 00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP 00:10.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02) 01:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI 01:17.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03) 01:18.0 USB Controller: Apple Computer Inc. KeyLargo USB 01:19.0 USB Controller: Apple Computer Inc. KeyLargo USB 01:1a.0 CardBus bridge: Texas Instruments PCI1211 06:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI 06:0f.0 Class ffff: Apple Computer Inc. UniNorth GMAC (rev ff) (I don't know what all this corresponds to, but there is no Ethernet inside.) But my kernel has NE2K_PCI modulised, and module ieee1394 is inserted in /etc/modules and it gets accepted with "modprobe ieee" (or "ieee1394" as I remember). subsidiary question: In which /dev should be the ethernet card? Thanks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
