I ran fbset -x to get an appropriate Mode for my monitor and then added that to my Monitor section, along with a range for horizsync and vertrefresh that included the Mode. My monitor is now being correctly set to 800x600, but X is still not loading.
I also removed the Option "Emulate3Buttons" "true" line, but it seems like the startup is still crashing when trying to load the mouse. The end of the log file says: (**) Configured Mouse: Protocol: "ImPS/2" (**) Configured Mouse: Core Pointer (**) Option "Device" "/dev/input/mice" (==) Configured Mouse: Buttons: 3 (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) Fatal server error: Caught signal 11. Server aborting Could it be because I'm using the standard Mac ADB 1 button mouse? It seems like it's expecting a 3 button mouse. If that's the issue, can it be fixed without buying a new mouse? I don't have USB ports and I'm guessing that I'd have to mail-order an ADB mouse. -Steven --- eric <[EMAIL PROTECTED]> wrote: > On 13 April, 2002 00:58, Steven Tomcavage wrote: > > I've installed woody on my PowerPC 6360 and I'm having > > trouble setting up my XF86Config-4 file. When I start > X, I > > get the initial "grey" screen with the X-cursor in the > > middle, then X shuts down. Any ideas? I get a "Caught > > Signal 11. Server aborting" right after (or in the > middle > > of?) loading the mouse. Could it be the ADB mouse? > Here's > > my XF86Config-4 file and the output when I start X: > > > > > Section "Device" > > Identifier "Generic Video Card" > > Driver "fbdev" > > Option "UseFBDev" "true" > > EndSection > > > > Section "Monitor" > > Identifier "Generic Monitor" > > HorizSync 30-57 > > VertRefresh 43-72 > > Option "DPMS" > > EndSection > > > um, u can use xvidtune, it'll scan the frequencies. i > tried it on mine, and > gave me almost exactly the same settings i'm using now > for vertrefresh and > horizsync. i'm running a 640x480 monitor on the onboard > video of a 7500, and > my settings for horizsync and vertrefresh are: > 34.880 and 66.437, and xvidtune reported 34.88 and 66.43. > YMMV > > > When reporting a problem related to a server crash, > please > > send > > the full server output, not just the last messages. > > This can be found in the log file > "/var/log/XFree86.0.log". > > Please report problems to [EMAIL PROTECTED] > > > > > > __________________________________________________ > > Do You Yahoo!? > > Yahoo! Tax Center - online filing with TurboTax > > http://taxes.yahoo.com/ > > > (**) Option "Emulate3Buttons" "true" > > (**) Configured Mouse: Emulate3Buttons, > Emulate3Timeout: 50 > > (II) XINPUT: Adding extended input device "Configured > > Mouse" (type: MOUSE) > > > > Fatal server error: > > Caught signal 11. Server aborting > > > > > if you have a 2 button mouse, use the emulate 3 buttons, > otherwise, take it > out. if u use the adb mouse, take it out, and a 3 button, > you don't need it. > > eric > > > -- > To UNSUBSCRIBE, email to > [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > > > __________________________________________________ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://taxes.yahoo.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
