On Wed, 2002-04-17 at 13:09, Michel D�nzer wrote: > On Wed, 2002-04-17 at 11:17, Eric Lemoine wrote: > > > > './m3mirror lcd:1 crt:1' works on my ibook2 but the > > screen on the vga output shakes. Is there anything > > I need to modify in XF86Config-4? > > You can play with the sync ranges in the monitor section, but so far > nobody has reported complete success.
Indeed, the video output works good enough for a projector I found out during my talk at GUADEC, but even using X as you told me to didn't work. Nothing comes out of the VGA output. I attached my XF86Config, so you can check it. Cheers -- /Bastien Nocera http://hadess.net
Section "Files"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
FontPath "/usr/share/fonts/truetype/openoffice/"
FontPath "/usr/local/share/fonts/screen"
ModulePath "/usr/local/X11R6/lib/modules"
EndSection
Section "ServerFlags"
EndSection
Section "Module"
Load "extmod"
Load "GLcore"
Load "glx"
Load "dbe"
Load "dri"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "ati"
# Option "UseFBDev"
Option "Display" "Mirror"
Option "ProgramFPRegs" "True"
Option "PanelWidth" "1024"
Option "PanelHeight" "768"
# Option "XAANoDashedBresenhamLine"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28-55
VertRefresh 43-75
# Option "DPMS"
# Mode "1024x768"
# D: 64.994 MHz, H: 48.359 kHz, V: 59.998 Hz
# DotClock 64.995
# HTimings 1024 1082 1218 1344
# VTimings 768 771 777 806
# Flags "-HSync" "-VSync"
# EndMode
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
# end of XF86Config
signature.asc
Description: This is a digitally signed message part

