At OpenFirmware prompt, I'm typing "boot hd:14,yaboot" and getting "can't OPEN: 14:hd,yaboot ok".
I've also tried "boot HD:14,yaboot" and "boot HD:[2-14],yaboot" and "boot hd:[2-14],yaboot" and "boot hd:" and "boot: HD" and "boot: hd,13" etc etc etc. This is on a Blue&White G3, 128MB RAM, 6GB drive. I've pretty comfortable with Debian on i386, but real green (novice) on Debian for Mac. When I began this project, the machine had OS 9.2.1 on it, and I started by following the installation instructions at debian.org for PowerPC (http://www.debian.org/releases/stable/powerpc/install, particularly at section 6.3.3.1, which is where I got the "debian-imac" folder). I misread the "using-pdisk.txt" and did an "i" to wipe out the partition table completely, and then created a partition scheme that I thought would provide me with Linux and Mac, but when I booted off the OS 9 CD the hard drive was no longer visible. It took a while (and a re-read of "using-pdisk.txt") to figure out I needed to reinstall OS 9 to get the disk drivers back in the partition table. So I started over with partitioning, this time leaving the disk drivers alone. I've tried several variants of my partitioning scheme, but nothing seems to work. Here's my current scheme as reported by pdisk: This app uses the SIOUX console library Choose 'Quit' from the file menu to quit. Use fake disk names (/dev/scsi<bus>.<id>; i.e. /dev/scsi0.1, /dev/scsi1.3, etc.). Top level command (? for help): l Name of device: /dev/ata0.0 Partition map (with 512 byte blocks) on '/dev/ata0.0' (/dev/hda) #: type name length base ( size ) 1: Apple_partition_map Apple 63 @ 1 2: Apple_Bootstrap boot 1600 @ 12654848 3: Apple_Driver_ATA*Macintosh 54 @ 64 4: Apple_Driver_ATA*Macintosh 74 @ 118 5: Apple_Driver_IOKit Macintosh 512 @ 192 6: Apple_Patches Patch Partition 512 @ 704 7: Apple_UNIX_SVR2 swap 524288 @ 1216 (256.0M) 8: Apple_UNIX_SVR2 / 153600 @ 525504 ( 75.0M) 9: Apple_UNIX_SVR2 /tmp 51200 @ 679104 ( 25.0M) 10: Apple_UNIX_SVR2 /usr 3276800 @ 730304 ( 1.6G) 11: Apple_UNIX_SVR2 /var 512000 @ 4007104 (250.0M) 12: Apple_UNIX_SVR2 /home 1024000 @ 4519104 (500.0M) 13: Apple_HFS "MacOS" 6963200 @ 5543104 ( 3.3G) 14: Apple_HFS "MacShared" 148544 @ 12506304 ( 72.5M) Device block size=512, Number of Blocks=12656448 (6.0G) DeviceType=0x0, DeviceId=0x0 Drivers- 1: 21 @ 64, type=0x701 2: 34 @ 118, type=0xf8ff Top level command (? for help): After my first mistake of wiping out the partition table and then having to reinstall OS 9, I created a partition table similar to the one above, but I had the Apple_Bootstrap partition between 6 and 7 (so it was 6). I later moved that (using the "r" command) to the second partition as per another HOWTO I found. I also planned to have both OS 9 and OS/X, and I understood that OS/X needed Apple_HFS+ (or UFS, which has been recommended against by two Mac-head friends and by what I've read today), so I created the "MacOS" partition as "Apple_HFS+", and created the "MacShared" partition as "Apple_HFS" (I couldn't find any documentation as to what the correct type was for HFS+, so I just guessed that it was "Apple_HFS+". When I then booted off the OS 9 CD, it wanted to initialize one of the Mac partitions (I don't remember now the exact sequence), and it seems like one of the drives (the HFS+ I think) didn't even show up, so I did a bit of tweaking and finally got both drives to show up on the desktop. I then installed OS 9, and put the "debian-imac" folder on the "MacShared" folder, and put the four special files (yaboot, yaboot.conf, linux, and root.bin) onto the root of "MacShared" also. I then rebooted into OpenFirmware, and started having problems. Throughout the day, I've gone back and installed OS/X as well, and some time after that noticed that it had converted the "MacShared" drive into "MacOS Extended", so I re-initialized that drive as "MacOS Standard". Still, it seems odd to me that the "Get Info" on the "MacOS" drive shows "Mac OS Extended" and the "MacShared" drive shows "Mac OS Standard", yet pdisk shows both partitions as "Apple_HFS". Hopefully that's enough information for someone to point me to a fix. Thanks! Kent -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
