On Thu, Oct 03, 2002 at 12:44:32AM +0200, Vincent Lefevre wrote:
> On Wed, Oct 02, 2002 at 18:26:44 -0400, christophe barb? wrote:
> > I get :
> > $ ./m3mirror
> > ATI Rage M3 mirror tool, v0.1
> > error 1074020353 getting mirror value
>
> I got the same error in the past. From a message I posted in March:
>
> The problem was due to benh's kernel configuration (I was told that it
> was already configured, but this is clearly not the case!). The things
> I changed in the latest configuration:
>
> _ Set Power management support for PowerBooks
> _ Set APM emulation
> _ Set Backlight control for LCD screens
Looks like they are now enabled by default. I see in my .config file:
CONFIG_PMAC_PBOOK=y
CONFIG_PMAC_APM_EMU=y
CONFIG_PMAC_BACKLIGHT=y
So I guess my problem is not a kernel config problem.
Related to this, I see in the boot message:
radeonfb: ref_clk=2700, ref_div=12, xclk=36675 from OF
radeonfb: detected DFP panel size from EDID: 1280x854
Console: switching to colour frame buffer device 160x53
Registered "ati" backlight controller, level: 15/15
radeonfb: pm reg @50, clk_pwrmgt: f17500, pll_pwrmgt: a027e01f,
mdll_cko: 980098
radeonfb: ATI Radeon M7 LW DDR SGRAM 32 MB
radeonfb: DVI port LCD monitor connected
radeonfb: CRT port no monitor connected
Looks like m3mirror is for aty128fg and I use radeonfb.
But I have tried to boot the kernel with the video=aty128fb without success.
If I find time I wil recompile my kernel without aty128fb and see.
Thanks,
Christophe
--
Christophe Barb� <[EMAIL PROTECTED]>
GnuPG FingerPrint: E0F6 FADF 2A5C F072 6AF8 F67A 8F45 2F1E D72C B41E
L'experience, c'est une connerie par jour mais jamais la m�me.
