On Tue, Oct 29, 2002 at 16:44:03 +0000, mallum composed: > Hi; > > I recently plugged PCI PCMCIA Adaptor into my 8600. I was then greeted with > the following on boot : > > Welcome to Linux kernel 2.4.19 > > linked at :Oxc0000000 > framebuffer at: 0x94000000 (phys), 0xd0800000 (log) > MSR :0x00003070 > MIB0 :0x80000c084 > > pmac_init(): exit > id mach(): done > MMU: enter > MMU: hw init > hash: enter > hash: find piece > hash: patch > hash: done > MMU: mapin > MMU setio > MMU: exit > setup_arch: enter > setuparch_arch: bootmem > arch: exit > > The machine then just appears to hang before rebooting. I've used the > same card on an x86 machine ( with stock 2.4.19 also ) with no > problems. > > Any idea what the issue could be ? Does anyone have a PCI PCMCIA > adaptor working in a pre G3 powermac ? >
the card may have to be flashed for mac use. FCode (openfirmware) may not be set for mac use. (see the IRC channel for more ;). simon > Many thanks; > > -- Matthew > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] >
