* Michel D�nzer ([EMAIL PROTECTED]) a �crit : > On Die, 2003-01-14 at 15:55, J�r�mie Pierson wrote: > > * Derrik Pates ([EMAIL PROTECTED]) a �crit : > > > On Tue, Jan 14, 2003 at 10:19:16AM +0100, J?r?mie Pierson wrote: > > > > xfree86 won't start on my g4 733 (with ati rage 128 pro pf, not the > > > > stock nvidia). I got no warnings or errors in the log, except in the > > > > last > > > > lines where x unloads all modules and tells me that: > > > > "Screen(s) found, but none have a usable configuration." > > > > > > > > I have a 2.4.20-ben1 kernel with aty128fb compiled in the kernel (not > > > > as a > > > > module), and console works fine. > > > > I read somewhere in the list archive that you need the aty128fb module > > > > to be loaded. Does it really mean that it must be compiled as a module ? > > > > > > No. Did you specify the "UseFBDev" option in the "Device" section? > > > > Yes. I have tried a few more options, "ForcePCIMode", "Display", and > > "AGPMode", without success. > > > > > It needs that. Though I can't imagine it causing that. Can you provide > > > more > > > context from the logs than just one line? > > > > The complete log and my XF86Config-4 are available at: > > http://doupatex.free.fr/fichiers/ > > You definitely need Option "UseFBDev", and aty128fb needs to be active > in console.
I have UseFBDev set to "True". What do you mean by "needs to be active" ? dmesg gives me: aty128fb: Rage128 Pro PF (AGP) [chip rev 0x1] 16M 128-bit SDR SGRAM (1:1) so I assume it's there and active. Any ideas ? J�r�mie
