On Mon, Jan 20, 2003 at 05:47:31PM -0800, Dylan Barrie wrote: > I'm setting up my UMAX J700 with a G3/300 upgrade card to be a small > CVS/web server, but I am having trouble getting Quik to work properly > on it. I have Debian installed and working, but I am forced to start > up from the MacOS and then use BootX to start up Linux when I want to > use it. I've been trying different things in Open Firmware, but > nothing has been working. > > These are the settings I use for OF: > > input-device kbd > output-device /[EMAIL PROTECTED]/3Dfx,[EMAIL PROTECTED] (I'm using a V3 card) > boot-device scsi-int/[EMAIL PROTECTED]:0 (the Linux HD is id 0 on the > internal chain) > boot-file /boot/vmlinux-2.2.20-pmac root=/dev/sda2 > boot-command begin ['] boot catch 1000 ms cr again >
Try putting the root= and image= in quik.conf rather than the boot-file entry, then just put the image name there e.g. Linux boot-file Linux image=/boot/vmlinux-2.2.20-pmac label=Linux root=/dev/sda2 partition=2 Your boot-device and boot-command look reasonable ... -- "The way the Romans made sure their bridges worked is what we should do with software engineers. They put the designer under the bridge, and then they marched over it." -- Lawrence Bernstein, Discover, Feb 2003
