I have no trouble getting my ibook2 with an aiport card to retrieve an IP address from my non-WEP airport.
At work, I have no trouble getting my ibook2 to retrieve an IP address from the 104-bit WEP-enabled linksys hub. At home, however, if I enable my airport's 40-bit WEP, I _CANNOT_ dhcp with it. A look through my dmesg reveals these lines: hermes.c: 5 Apr 2002 David Gibson <[EMAIL PROTECTED]> orinoco.c 0.11b (David Gibson <[EMAIL PROTECTED]> and others) airport.c 0.11b (Benjamin Herrenschmidt <[EMAIL PROTECTED]>) eth1: Station identity 001f:0001:0008:0046 eth1: Looks like a Lucent/Agere firmware version 8.70 eth1: Ad-hoc demo mode supported eth1: IEEE standard IBSS ad-hoc mode supported eth1: WEP supported, 104-bit key <==============notice this! eth1: MAC address 00:30:65:24:DB:19 eth1: Station name "HERMES I" eth1: ready airport: card registered for interface eth1 Can surmise from this that my card is not configured to handle mere 40-bit encryption? Is it possible to configure it for this? Can anyone tell me how? Thanks Mark
