On Sat, 12 Apr 2003, Benjamin Herrenschmidt wrote: > > > Eh? Why does the keyboard WORK with init=/bin/sh, but NOT WORK when > > booting as per usual? That makes zero sense... > > It does make senes. With init=/bin/sh, the keyboard works with > the kernel built-in keymap. Later on, your userland scripts are > loading a keymap, which is probably designed for the "wrong" > keycode type, and thus produce the incorrect results.
Ahh. God bless userland scripts in /etc/*.d screwing things up. :/ > > If you have CONFIG_ADB_KEYCODES set, then either clear it or > boot with keyboard_sends_linux_keycodes=1 on the cmdline (you > can also change it via /proc/sys/dev/mac_hid) > I could find no CONFIG_ADB_KEYCODES. (I rgrep -r -i'd for it). I am presuming you meant CONFIG_ADB_KEYBOARD, and proceeding along those lines... > > > > Setting the System Clock using the Hardware Clock as reference... > > > > > > So the problem is really with the real time clock, or with the > > > Cuda driver. It works fine on the 8500 I have here (approximately > > > same hardware), though. Can you disable both CONFIG_RTC and > > > CONFIG_PPC_RTC ? That will prevent sync'ing the clock but should > > > allow it to boot. > > > > Trying right now. Kernel compiles take a while on a 601/90... even with > > cache... > > Heh, yup > > > > > > > Also, is your kernel compile with CONFIG_SMP ? (I beleive it isn't > > > but still...) > > > > > > > I don't think so. >checks< No. And just in case you were gonna ask that > > next, YES, I AM compiling with the Machine Type as "CHRP/PowerMac/PReP" ;) > > You wouldn't have gone far without this one ;) Hee. I bet. I never tried mussing that one up ;) > > > And with the Processor Type as "6xx/7xx/64xx/8260" ;) And with AltiVec > > Support off. And with Thermal Management Support off. An with CPU > > Frequency scaling off. And with MPC8260 CPM Support off. :> > > Ok, well, those above don't really matter. It really looks like you are > either running CONFIG_RTC instead of CONFIG_PPC_RTC or I broke something > in the Cuda driver on non-SMP (guess what ? my 8500 is SMP :) I'll check > the later case here. > Was ist das "Cuda"? > Ben. > J e s s i c a L e a h B l a n k
