I now have netatalk installed (thank you, Michel), but so far, netatalk refuses to connect to all of my networks. Starting with the following atalkd.conf file:
# cat /etc/netatalk/atalkd.conf eth0 eth1 -seed tun0 -seed I restart the daemon, which changes atalkd.conf as follows: # /etc/init.d/netatalk restart Restarting AppleTalk Daemons (this will take a while)..done. # cat /etc/netatalk/atalkd.conf eth0 -phase 2 -net 65280-65534 -addr 65280.22 eth1 -seed -phase 2 -net 65280-65534 -addr 0.0 tun0 -seed -phase 2 -net 65280-65534 -addr 0.0 Note that addresses of 0.0 are illegal. The -seed options do not change the outcome. Plus, looking at the /proc/net/atalk_iface file reveals # cat /proc/net/atalk_iface Interface Address Networks Status eth0 FF00:16 FF00-FFFE 0 lo 0000:00 0000-0000 0 So only eth0 gets configured, and my macs are on tun0 and eth1. The tun0 mac wants an address of 65514.144 according to the appletalk control panel, but the atalkd.conf file gets over written with 0.0 no matter what address I put in. Can anyone help me understand what is happening? Thanks. Marvin
