Hi all,
Im running a Apple Macintosh 9600/300 Powerpc and just updated my debian
kernel to 2.4.18. Sudddenly the display dont come on at startup. Besides
from that everything is working fine. I figure there's some setting in
quik.conf I need to set to get it to see the graphic card, right? Can
someone help me with this, I got the below kernel boot log:
�Linux version 2.4.18-powerpc ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002�
�
�Found a Grand Central mac-io controller, rev: 2, mapped at 0xfdf00000 � �
�PowerMac motherboard: PowerMac 9500/9600 � �
Cache coherency enabled for bandit/PSX at 00000000 � �
Found Bandit PCI host bridge at 0xf2000000. Firmware bus number: 0->0 � �
Cache coherency enabled for bandit/PSX at 00000000 � �
�Found Bandit PCI host bridge at 0xf4000000. Firmware bus number: 1->1 � �
� �On node 0 totalpages: 49152 � �
�zone(0): 49152 pages. � �
� �zone(1): 0 pages. � �
� �zone(2): 0 pages. � �
� �Kernel command line: root=/dev/sda8 ro � �
� �System has 32 possible interrupts � �
� �GMT Delta read from XPRAM: 120 minutes, DST: on � �
� �via_calibrate_decr: ticks per jiffy = 250000 (1500003 ticks) � �
� �Console: colour dummy device 80x25 � �
� �Calibrating delay loop... 299.82 BogoMIPS � �
� �Memory: 189416k available (1620k kernel code, 964k data, 280k init, 0k hi� �
� �Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) � �
� �Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) � �
� �Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) � �
� �Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) � �
� �Page-cache hash table entries: 65536 (order: 6, 262144 bytes) � �
�POSIX conformance testing by UNIFIX � �
� �PCI: Probing PCI hardware � �
�PCI:00:10.0: Resource 0: f3000000-f301ffff (f=200) � �
� �PCI:01:0f.0: Resource 0: 92000000-92ffffff (f=1208) � �
� �PCI:01:0e.0: Resource 1: 90000000-90000fff (f=200) � �
� �PCI: Enabling device 01:0e.0 (0014 -> 0017) � �
� �Macintosh CUDA driver v0.5 for Unified ADB.
and on.
/Svante Tidholm
