Hi, If anyone has a clue as to where to look further that would be great. I've poked around in the Linux radeonfb driver as well as in the xfree86 radeon driver for clues, so far no success.
I recently had a broken motherboard on my iBook replaced. Previous to the replacement suspend worked well. Now the screen remains blank upon waking up. When the machine wakes the backlight turns back on, the machine accepts keyboard input and is accessible via the network, all appears to be working, but the display is all black. FWIW, OSX successfully redraws the screen on wake-up, so I believe the hardware to be OK. I have tried two different kernels with the same results: Debian 2.4.22-powerpc 2.4.23-pre5-ben0 Included is output from the radeon driver initializing with debug turned on in case that helps[1]. I get the same bad behavior at console as well as in X. Thanks, David [1] Exhibit A: radeonfb.c initializing radeonfb_pci_register BEGIN PCI: Enabling device 00:10.0 (0086 -> 0087) radeonfb: ref_clk=2700, ref_div=12, xclk=36000 from OF radeonfb: probed DDR SGRAM 32768k videoram BIOS 4 scratch = 0 FP_GEN_CNTL: 30048, FP2_GEN_CNTL: 8 TMDS_TRANSMITTER_CNTL: 10000082, TMDS_CNTL: 1000000, LVDS_GEN_CNTL: d26a1 DAC_CNTL: ff60410a, DAC_CNTL2: 22, CRTC_GEN_CNTL: 3000200 hOver_plus = 24^I hSync_width = 136 vOver_plus = 3^I vSync_width = 6 hblank = 320^I vblank = 38 sync = 3 misc = 0 clock = 6500 radeonfb: detected DFP panel size from EDID: 1024x768 hStart = 1048, hEnd = 1184, hTotal = 1344 vStart = 771, vEnd = 777, vTotal = 806 h_total_disp = 0x7f00a7^I hsync_strt_wid = 0x910412 v_total_disp = 0x2ff0325^I vsync_strt_wid = 0x860302 pixclock = 15384 freq = 6500 post div = 0x2 fb_div = 0x3a ppll_div_3 = 0x600ad Console: switching to colour frame buffer device 128x48 radeonfb: ATI Radeon M7 LW DDR SGRAM 32 MB radeonfb: DVI port LCD monitor connected radeonfb: CRT port no monitor connected radeonfb: Power Management enabled for Mobility chipsets radeonfb_pci_register END
