On Tue, 2003-12-23 at 15:37, Bill Carini wrote: > I have an Adaptec 2906 SCSI card installed in a G4 tower. > This is the sort of thing that happens when I boot just about any kernel > except for 2.4.20-pre5-ben0: > (this output was from trying out 2.4.23-pre5-ben0, precompiled from > ppckernel.org): > > SCSI Subsystem driver Revision 1.00 > Machine check in kernel mode. > Caused by (from SRR1=49030): Transfer error ack signal
drivers/scsi/aic7xxx/aic7xxx_osm.h:#define MMAPIO Try turning that into #undef MMAPIO and let me know if that help Thanks, Ben. > --Bill > > --------------------------------------------------------------------------------------------- > 00:0b.0 Host bridge: Apple Computer Inc.: Unknown device 002d > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- > Latency: 16, cache line size 08 > Capabilities: [80] AGP version 1.0 > Status: RQ=7 SBA+ 64bit- FW+ Rate=x1,x2 > Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> > > 00:10.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF (prog-if > 00 [VGA]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping+ SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 255 (2000ns min), cache line size 08 > Interrupt: pin A routed to IRQ 48 > Region 0: Memory at 94000000 (32-bit, prefetchable) [size=64M] > Region 1: I/O ports at 802400 [size=256] > Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=16K] > Expansion ROM at 90020000 [disabled] [size=128K] > Capabilities: [50] AGP version 2.0 > Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 > Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none> > Capabilities: [5c] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 10:0b.0 Host bridge: Apple Computer Inc.: Unknown device 002e > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- > Latency: 16, cache line size 08 > > 10:12.0 SCSI storage controller: Adaptec AHA-7850 (rev 03) > Subsystem: Adaptec AHA-2904/Integrated AIC-7850 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 16 (1000ns min, 1000ns max), cache line size 08 > Interrupt: pin A routed to IRQ 52 > Region 0: I/O ports at 0400 [disabled] [size=256] > Region 1: Memory at 80083000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [dc] Power Management version 1 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > > ********************************************************************** > This email was brought to you by the Mutt E-Mail Client (www.mutt.org) > and Debian GNU/Linux (www.debian.org) > ********************************************************************** -- Benjamin Herrenschmidt <[EMAIL PROTECTED]>
