On Tue, Jan 06, 2004 at 10:23:14PM +0100, Rene Lemke wrote: > > Hello, > > I have woody installed on my Wallstreet. Via BootX it's boot fine. > But I want boot Linux directly. An uncompressed Kernel is in /boot. > It is the same kernel, that uses BootX, linux.bin from the Debian > Installation CD. > I type reboot on console, hear the chimes, and that is all, dark > silence. What is wrong? > > My /etc/quik.conf: > > init-code="dev /pci/mac-io/via-pmu backlight-on" > root=/dev/hda11 > timeout=50 > default=Linux > partition=11 > image=/boot/linux.bin > label=Linux > alias=l > read-only > > image="$bye" > label=MacOS > alias=m > > > My nvram settings via nvsetenv: > > little-endian? false > real-mode? false > auto-boot? true > diag-switch? false > fcode-debug? false > oem-banner? false > oem-logo? false > use-nvramrc? false > real-base 0xffffffff > real-size 0x100000 > virt-base 0xffffffff > virt-size 0x100000 > load-base 0x4000 > pci-probe-list 0xffffffff > screen-#columns 0x64 > screen-#rows 0x28 > selftest-#megs 0x0 > boot-device /pci/mac-io/ata0/[EMAIL PROTECTED]:11
I believe you want 0:0 here, not 0:11. quik writes itself into the boot block (partition '0'). > boot-file Linux > diag-device fd:diags > diag-file > input-device kbd > output-device screen > oem-banner > oem-logo > nvramrc > boot-command begin ['] boot catch 500 ms cr again > -- Debian GNU/Linux Operating System By the People, For the People Chris Tillman (a people instance) toff one at cox dot net
