I just changed my kernel, and I had the same problem. It seems that
you can get at it from /dev/discs/disc0/part11 or so. I had to change
/etc/fstab.
Good luck.
On Jan 26, 2004, at 9:41 PM, Brad Lathem wrote:
I had written earlier about a kernel problem for a powerbook g4.
Matthew Harrell sent me a kernel configuration file, which I used.
The kernel compiled without a problem, and I installed it. Now I get
the following error at boot-up (my partition type is ext3):
checking root filesystem...
fsck 1.35-WIP (07-Dec-2003)
fsck.ext3: No such file or directory while trying to open /dev/hda11
/dev/hda11:
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the
superblock is corrupt, and you might try running e2fsck with an
alternate superblock:
e2fsck -b 8193 <device>
fsck failed. Please repair manually and reboot. Please note that the
root filesystem is currently mounted read-only. To remount it
read-write:
#mount -n -o remount,rw /
CONTROL-D will exit from this shell and REBOOT the system.
Also, the ethernet quit working. Does anyone know anything I might
do? Thanks in advance.
p.s.-I looked online about this problem, but couldn't figure out
exactly what the correct solution should be.
------------------------------------------
Brad Lathem
Dept. of Mathematics
Georgia Institute of Technology
Office: Skiles 153
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
------------------
Steven Schlansker
Tech Support & Programming
Flamin' Ghost Software
http://www.fgsoft.net/
[EMAIL PROTECTED]
[EMAIL PROTECTED]
>Windows 98: n.
> useless extension to a minor patch release for 32-bit extensions and
> a graphical shell for a 16-bit patch to an 8-bit operating system
> originally coded for a 4-bit microprocessor, written by a 2-bit
> company that can't stand for 1 bit of competition.
