Hi, On Fri, 24 Sep 2004 02:54:49 -0400 Rick Thomas <[EMAIL PROTECTED]> wrote:
> > On Thursday, September 23, 2004, at 08:17 PM, Russell Hires wrote: > > > Has anyone done this? And if so, how? I'm running sarge, BTW... Works fine between a 6400 and a beige G3 here, both running Debian -- i use minicom to access the serial port. Of's default settings are 38400 bauds / 8 bit data / no stop bit / 1 parity, and xon/xoff, if I remember. Apart from the kernel command-line, you'll also need to edit your/etc/inittab to put a getty on the serial line. > By the way, the Mac's Open Firmware serial console is on the > "modem" port, not the "printer" port of the mac. This is configurable, just set OF's 'output-device' and 'input-device' accordingly. Simon -- Simon Vallet Due to massive spam, the address shown in the From: header above only accepts mail from Debian hosts. If you wish to mail me privately, just remove the 'debian-ppc_' tag from the local part.
