Do you run os x on it?? I seem to be able, when I install on another machine and plug an ibm deskstar in the 1st ide bus, together with the cdrom. otherwise: no go...
also rev 1. Op 19-nov-04 om 14:48 heeft Mehul N. Sanghvi het volgende geschreven:
'allo, I've got a G3 B&W with 768 MB of RAM in it, one 6 GB Maxtor and a 13 GB IBM DeskStar. The disks are both IDE. On my old PowerMac 7100, under MacOS 7.6.1 I used to have something that tested the RAM and hard disk to see if things were working fine. It also tested the L2 cache as well. I can't remember the name of the program(s) since its been years and years. Is there some sort of a command line program that does something similar, under Linux ? I seem to have problems, which appear to be random, especially when using apt-get and aptitude, which give me quiet a few segmentation faults. I wanted to test the RAM and make sure the memory is good. The 13 GB IBM is just sitting around useless because I seem to get data corruption, although from reading at http://lowendmac.com/ it seems that the corruption might be due to the fact that I have a Rev 1. B&W which has a bad IDE controller chip. cheers, mehul -- To UNSUBSCRIBE, email to [EMAIL PROTECTED]with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
-- ICQ# 286472197
