According to Pablo Gil, on Thu, 25 Aug 2005 15:01:41 +0200, >Hi everyone! > >I'm fed up with this. I've been trying for weeks with no >results. I've got an external HD and a camera. Both are >vfat devices. As long as I know (and I'm pretty sure cos >i've checked) I've the right kernel options enabled, but I >can not mount them. > >When I try to use the camera dmesg says this: > >> usb-storage: waiting for device to settle before scanning >> Vendor: FUJIFILM Model: USB-DRIVEUNIT Rev: 1.00 >> Type: Direct-Access ANSI SCSI >revision: 00 > SCSI device sda: 256000 512-byte hdwr >sectors (131 MB) > sda: Write Protect is off >> sda: Mode Sense: 0b 00 00 08 >> sda: assuming drive cache: write through >> SCSI device sda: 256000 512-byte hdwr sectors (131 MB) >> sda: Write Protect is off >> sda: Mode Sense: 0b 00 00 08 >> sda: assuming drive cache: write through >> sda: sda1 >> Attached scsi removable disk sda at scsi4, channel 0, id >0, lun 0 > Attached scsi generic sg0 at scsi4, channel 0, >id 0, lun 0, type 0 > usb-storage: device scan complete >> FAT: bogus number of reserved sectors >> VFS: Can't find a valid FAT filesystem on dev sda.
Shouldn't you try to mount sda1 instead of sda? I use the following line in fstab: /dev/sda1 /mnt/usb1 vfat noatime,noauto,user,rw,exec,sync 0 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
