On Tue, Oct 04, 2005 at 09:01:19PM +0200, Niklaus Giger wrote: > Am Freitag, 30. September 2005 11.36 schrieb Sven Luther: > > Hi all, > > > > In order to fix the isos for IBM boxes, some adjustements where made to the > > yaboot.conf, and in particular i dropped the device=cd: line, since the cd > > alias doesn't seem to be used everywhere, and it would have failed if not > > using the primary cd drive. > Sorry for answering so late, but I did not have any time to test it before. > I just finished my test on my PowerMac blue/white. > > My testmachine as per /proc/cpuinfo was a PowerMac1,1; 66 (Blue&White G3). > > I burned the CD from Oktober third. > Booting was not problem. I even did a full install, as I wanted to upgrade my > son's machine to the actual GNU/Debian testing. > > As my wife's Pismo PowerBook has a broken CD-ROM drive I used the netboot > vmlinux and initrd.gz from > http://people.debian.org/~luther/d-i/images/daily/powerpc/netboot/ > (as per October 4), modified my yaboot.conf a little bit and voila I got to > the first language selection prompt. > /proc/cpuinfo gives PowerBook3,1. > > Thanks a lot for your work!
Neat, so this is prismo and blue&white, neat. I think this most of solves the worries, there is missing the first ibooks and the other powerbook beside the prismo, which where i believe the first newworlds. Not sure about the non-prismo powerbook if it was older or not. Thanks for testing this. Friendly, Sven Luther -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
