Hi Sven; On Thu, Dec 22, 2005 at 02:51:15PM +1100, Dean Hamstead wrote: > lol, thats so outside my ball park. but you can be > happy that its not a common problem, > > im sure ben or sven will be able to say something like > 'that is because of xyz'
>Well, he uses a 2.4.26 kernel, which is not something supported, and uses some >random embedded board with some unknown boot-loader (probably uboot ?). >I guess he has some trouble with his kenrel, or maybe is hitting the memory >limit. >KokHow Teh, i am running 2.6.10 on my MPC8248 board, and i suggest you move to >2.6 also, maybe 2.6.14 would be best, not sure. Then you make sure you enable >the powerquicc II stuff in your kernel, and remove all the load of other stuff >that is not really needed, best is to take a defconfig adapted to your kernel. >As for the rest, i guess the board has 16MB of ram, which is not much, and no >disk, so look on that side. >/me wonder if debian should provide powerquicc kernels, for these cases, but i >doubt it makes sense. My PQ2FADS-ZU is having MPC8280 onboard. Which 2.6.10 source tree do you use to run on your MPC8248 board? I have downloaded 2.6.14.4 from kernel.org and I don't find *exact* _defconfig for MPC8280 or PQ2FADS-ZU. I guess I would start with something close but it will need some time and effort to customize the config file and perhaps some changes to the source tree before I could successfully boot the kernel...? Regards, TEH -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
