On Wed, Mar 22, 2006 at 04:23:07PM +0100, Simon Vallet wrote: > On Mon, 20 Mar 2006 15:28:54 +0100 > Hans Ekbrand <[EMAIL PROTECTED]> wrote: > > > On Mon, Mar 20, 2006 at 03:09:18PM +0100, Simon Vallet wrote: > > > On Mon, 20 Mar 2006 14:03:23 +0100 > > > Hans Ekbrand <[EMAIL PROTECTED]> wrote: > > > > > > > No need for BootX (and with 16 MB RAM, the HD is probably small too, > > > > so avoiding BooX seems preferable). My recommendation is boot floppies > > > > from woody and boot the installed system with quik. Thats how I > > > > installed on my Performa 5400 with 24 MB RAM. > > > > > > I agree on the BootX overhead, however be aware that the 6400 will nost > > > likely *not* boot from OF with 'screen' as output-device -- you'll need > > > to use a third party video adapter or a serial console > > > > That would only be necessary if something goes wrong, normally you > > don't need to interact with quik. And if something does go wrong, you > > can boot with the boot floppies again and rescue the system. > > While that is technically correct, I think you're on this list long > enough to know that in the vast majority of cases, quik doesn't "just > work" -- did it for your 5400 ?
No, it didn't. I had to try and fail quite a few times to get it to
boot, (finding out the correct value of the boot-device variable in OF
and in /etc/quik.conf was difficult),[1] and did mess with a serial
cable. However, with support from the list, future users might succeed
at the first try.
> I think future quik users need to know that it is not always the
> "best"/easiest/quickest solution, even if that's the one I personally
> adopted.
No, not the easiest, since it is a bit error-prone, but the best once
you get it running.
[1] Here is what I have to issue (as root) for quik to boot:
# nvsetenv boot-device ata/[EMAIL PROTECTED]:0
# nvsetenv boot-command "begin ['] boot catch 1000 ms cr again"
And here is my /etc/quik.conf
timeout = 20
default = linux
device = ata/[EMAIL PROTECTED]
partition = 5
root = /dev/hda5
image = /vmlinux
initrd = /initrd.img
append = "ramdisk_size=8192"
label = linux
Notice the difference between the "device" parameter in quik.conf =
"ata/[EMAIL PROTECTED]" and in OF = "ata/[EMAIL PROTECTED]:0".
--
Hans Ekbrand (http://sociologi.cjb.net) <[EMAIL PROTECTED]>
A. Because it breaks the logical sequence of discussion
Q. Why is top posting bad?
signature.asc
Description: Digital signature
