On Fri, May 19, 2006 at 11:20:29PM +1000, Paul Collins wrote: > Johannes Berg <[EMAIL PROTECTED]> writes: > > > On Thu, 2006-05-18 at 10:25 +0300, Eddy Petri??or wrote: > > > >> Any chance for 5,2 ? What is needed for it? Codec only? > > > > I don't know. If you try loading the modules, the kernel will tell you > > something about an unhandled layout id. Alternatively, you can find the > > layout-id file in your /proc/device-tree/ and tell me the number in it. > > The rest I can figure out. > > I have a PowerBook5,4 here and I'd be happy to test support for it. > The hardware is identified by snd-powermac as "PowerMac Snapper" and > the layout ID appears to be "3".
I wanted to test on my PowerBook5,2. Uhfortunately i can't find no layout-id file for the sound device or any other layout-id file for that matter: $ find /proc/device-tree | grep -i layout /proc/device-tree/[EMAIL PROTECTED]/ram-layout-architecture Futhermore one loading the i2sbus module it only gives some information in dmesg once every two tries ? No errors are shown when there is no output. Probably not very usefull, but when i get output it shows the following: i2sbus: mapped i2s control registers i2sbus: control register contents: i2sbus: fcr0 = 0x0 i2sbus: cell_control = 0x0 i2sbus: fcr2 = 0xa2caec i2sbus: fcr3 = 0x0 i2sbus: clock_control = 0x0 i2sbus control destroyed Sjoerd -- Life exists for no known purpose. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
