I used to have an iBook G3 500 MHz Dual USB, with a modem that worked with the pmac_zilog, a so-called "i2c-modem". I was not using it on a regular basis, when I needed it recently, it was detected, but I could not communicate with it. I thought the modem was broken, so I ordered another modem on eBay, it has a smaller board and fits in the same port as the old one.
Since my logic board had a display issue, I replaced it with an iBook 2.2 logic board at 800MHz and installed the newer modem. It is not detected at all, pmac_zilog detects two serial ports, lsusb does not detect a soft-modem. Still, there seems to be an i2c-modem entry in the OF device tree (/proc/device-tree/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/i2c-modem). Has anyone have experience with this issue ? Is my older modem broken, if not, can I install it on my board ? Is pmac_zilog broken in some way ? If somebody can provide insight in this issue, I would appreciate it very much. Cheers, Jonathan -- Jonathan Bastien-Filiatrault, [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
