Hello. I've just joined this list so I apologize if this issue has been addressed:
I've installed Debian sarge on a Blue and white G3. This box is planned to be used as a DNS resolver for our network. I got DJB DNS set up and working like a champ, my problem lies in the network card. We use gigabit fiber for our core network and I chose this model because it has the 64 bit pci bus that most giga fiber cards use. I installed a Intel gigabit card installed. The e1000.0 module that this card requires is present in the kernel but for some reason it doesn't load. I don't know if its related but the drivers for the USB and Firewire don't load properly either. here is an except from the dmesg log ieee1394: SelfIDs failed monotony check with 22/0 ieee1394: Error in SelfID stage, resetting pcilynx0: resetting bus (long bus reset) on request pcilynx0: bus reset interrupt pcilynx0: SelfID process finished (phyid 0, root) pcilynx0: SelfID packet 0x568c7f80 rcvd ieee1394: SelfIDs failed monotony check with 22/0 this repeats about 50 times then: ieee1394: Stopping out-of-control reset loop ieee1394: Warning - topology map and speed map will not be valid pcilynx0: invalid transaction code ieee1394: got invalid ack 254 from node 65535 (tcode 4) ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting... ieee1394: Stopping reset loop for IRM sanity Thanks in advance for any insite. Dan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
